Electrical Connections - Renishaw QUANTiC RTLC40 Installation Manual

Electrical connections

Grounding and shielding
QUANTiC readhead
Shield
IMPORTANT: The shield should be connected to the machine earth (Field Ground). For JST variants the ferrule should be connected to the machine earth.
Maximum cable length
Readhead cable
Maximum extension cable length
Readhead to ADTi-100
Remote CAL operation
CAL
0 V
Remote operation of the CAL /AGC is possible via CAL signal.
Readhead termination / connector
Analogue
5 m
Dependent on the cable type, the readhead cable length and the clocked output option.
Contact your local Renishaw representative for more information.
5 m
Customer electronics
5 V
Output signals
0 V
Digital
3 m
3 m
www.renishaw.com 33