Operating Instructions - Kärcher G 4000 OH servo press Manual

STEP 1:
Pull the spring-loaded collar of the wand
back to insert your choice of quick connect
nozzle.
Release the collar and push the nozzle
until the collar clicks.
CAUTION
High pressure in nozzle area.
Risk of injury caused by improperly locked
nozzle.
■ Make sure you hear a "click" when insert-
ing the nozzle tip in to the wand.
■ Pull the nozzle to make sure it is seated
properly before operating your unit.
STEP 2:
Attach the high pressure hose to the trig-
ger gun.
STEP 3:
Lock the safety lock.

OPERATING INSTRUCTIONS

STEP 4:
Adjust working pressure and water vol-
ume by turning the Remote Pressure
Control either direction.
Always return the control to the high-
est setting before shutting the pressure
washer off.
STEP 5:
Check oil level. Oil level should always
be between the "FULL" and "ADD" or
"MAX" and "MIN" marks on the dipstick
as shown in the picture below.
FULL / MAX
ADD / MIN
Be sure the machine is level when check-
ing the oil level. (Refer to the engines
operating manual for seasonal grades).
We recommend that the oil be changed
after the fi rst 5 hours of use, then once
every 50 hours.
STEP 6:
Fill gas tank with unleaded gasoline.
Do not use leaded gasoline.
Do not add oil to the gasoline.
STEP 7:
Connect the high pressure hose to the
high pressure outlet on the pump.
English 7