Table of Contents
Advertisement
PRO-TECT
PLUS
TM
LOCKING
FEATURE
To disable the usage of the VCR, or to protect your timer
recordings, you can lock the VCR so that the buttons
on the
VCR or remote won't work.
To Lock: Press and hold the VCR button
on the remote
for approximately
six seconds. SAFE appears.
To Lock While a Timer Recording
is in Progress: Press
and hold the VCR button
on the remote for approximately
six seconds.
•
To Unlock: Press and hold the VCR button
on the remote for
approximately
six seconds.
Locking Your VCR
If a timer
recording
is programmed,
make sure your VCR is turned
off.
Locking your VCR prevents
the VCR
from being accidentally
turned
on.
]
TIME
COUNTER
The time counter shows the actual time it takes to record a
program
or play back a segment of a recorded tape. It helps
locate the beginning
or end of programs you taped. The time
counter
resets to 0:00:00 whenever
the tape is ejected from
the VCR.
For example,
if you record a 30-minute
program
at the
beginning
of the tape and you want to go to the end of
that program
to begin another
recording, you would:
1.
Press INFO twice
to display the time counter.
2.
Press CLEAR to reset the time counter to 0:00:00.
3.
Press FWD to forward
the tape until the time counter
reads 0:30:00.
4,
5,
Press STOR This is the approximate
end of the program.
(You may want to press PLAY to verify.) Now, you can
begin recording
at this spot.
Press INFO to remove the time counter from the
screen and return to the normal display mode.
0:30:00
HOORS_J
l
M_NUTES
SECONDS
Timer Counter on-screen display
shows hours, minutes and seconds
of a segment of tape.
48
Advertisement
Table of Contents
