Planned maintenance
SERIES 1500 LIQUID TURBINE METER
March 2019
2. Thread the nut into the shaft end and insert the shaft through the upstream hanger
3. Insert the upstream cone to the shaft. The thrust washer should remain in the cone.
4. Insert the journal bearing in to the rotor assembly.
82
www.Daniel.com
92
Figure 9-8: Upstream hanger assembly installation
assembly on the inlet side.
Figure 9-9: Upstream cone installation
Daniel Series 1500 Liquid Turbine Meter, NPS 3-24
User manual
P/N 3-9008-515