Table of Contents
Advertisement
User manual
SERIES 1500 LIQUID TURBINE METER
P/N 3-9008-515
WARNING
HIGH PRESSURE HAZARD
Choose the appropriate size and material of the flange for their piping requirements.
Choosing an incorrect flange may cause a pressure leak, resulting in death or serious
injury.
2.2.2
Requirements and limitations for installation
Figure 2-2: Typical installation for a Series 1500 LTM
•
Note the direction of flow indicated on the plate near the inlet flange and install
accordingly.
•
New installations: Flush lines thoroughly to rid piping of potentially damaging foreign
material such as welding bead, pipe scale, etc. before the turbine meter is placed into
service.
Important
A spool piece installed in place of the turbine meter is recommended for this procedure.
NOTICE
Comply with local government regulations and company requirements.
48
www.Daniel.com
User manual
Operating conditions and specifications
March 2019
51
Advertisement
Table of Contents
