Lme Remote Operation - DANIEL 1500 Series User Manual

Operation parameters
March 2019
Important
Always use a flushing medium that is compatible with the metallurgy of the meter,
internal components. Using water as a flushing medium may result in damage to the
internal components of the turbine meter.
8.4

LME remote operation

Note
LME should be remote mounted when the ambient temperature is above 60 ºC (140 ºF).
The primary output is a single or dual high resolution signal that is amplified and shaped by
an integral amplifier mounted within an explosion-proof housing. This wave pulse can be
fed directly to remote totalizing counters, digital readout devices, presets, or control
instrumentation.
NOTICE
Inspect all electrical connections to ensure compliance to electrical codes and safety
regulations.
82
www.Daniel.com
Daniel Series 1500 Liquid Turbine Meter, NPS 3-24
User manual
USER MANUAL
P/N 3-9008-515
73