Wire Routing - Assa Abloy Corbin Russwin PED5000 Series Installation Instructions Manual

PED4000/PED5000 Series Exit Devices
with optional connections
Installation Manual
5

Wire Routing

PED4600
OVERVIEW
Step 1 . Install mortise lock . Route wire
as shown .
Electric Trim
(If applicable)
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2023 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
M91 Connection
M93 Lever Monitoring
(if applicable)
Electric Trim
(If applicable)
M91 Connection
M93 Lever Monitoring
(if applicable)
Step 3 . Install chassis and rail .
Make wire connections .
M91 Connection
M93 Lever Monitoring
(if applicable)
Electric Trim
(If applicable)
Step 2 . Route trim wires as shown .
Wire Clip
Step 4 . Pull back excess wire
through rail . Route wires as
shown . Install wire clip .
5
FM575 01/23