PED4000/PED5000 Series Exit Devices
with optional connections
Installation Manual
5
Wire Routing - continued
PED5800
Step 1 . Route wires as shown and
secure trim to door .
Step 3 . Install rail .
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2023 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
M91 Connection
Electric Trim
(If applicable)
M93 Lever Monitoring
(if applicable)
Step 4 . Make wire connections .
Step 2 . Install chassis (Section 4) and route wires
through chassis as shown .
Step 5 . Snap trim jumper to clip
and route excess wire as shown .
Main Slide & Roller
Step 6 . Tuck wire connections along side of
main slide . Pull back excess wire through rail .
10
FM575 01/23