Bluetooth ® Connectivity With Fitness App; Remote Heart Rate Monitor - Nautilus Schwinn 470 Assembly Manual / Owner's Manual

Table of Contents

Workout with Other Fitness Apps

our latest list of supported partners, please visit:

USB Charging

If a USB Device is attached to the USB Port, the Port will attempt to charge the Device. The power supplied from the USB

Port may not be enough to operate the Device and charge it at the same time.

(CHR) sensors are installed to send your heart rate signals to the Console. The Console can also read telemetry HR

signals from a Heart Rate Chest Strap Transmitter that operates in the 4.5kHz - 5.5kHz range.

Note: The heart rate chest strap must be an uncoded heart rate strap from

Polar Electro or an uncoded POLAR

POLAR

heart rate straps such as POLAR

will not work with this equipment.) Though your machine is Bluetooth

enabled, it is unable to receive input from a Bluetooth

or other device.

If you have a pacemaker or other implanted electronic device,

consult your doctor before using a wireless chest strap or other

telemetric heart rate monitor.

NOTICE: To prevent interference with the telemetry HR receiver, do not place

any personal electronic devices in the left side of the media tray.*

Contact Heart Rate Sensors

Contact Heart Rate (CHR) sensors send your heart rate signals to the Console. The CHR sensors are the stainless steel

parts of the Handlebars. To use, put your hands comfortably around the sensors. Be sure that your hands touch both the

the Console to detect a pulse. After the Console detects four stable pulse signals, your initial pulse rate will be shown.

Once the Console has your initial heart rate, do not move or shift your hands for 10 to 15 seconds. The Console will now

• Movement of the upper body muscles (including arms) produces an electrical signal (muscle artifact) that can interfere

with pulse detection. Slight hand movement while in contact with the sensors can also produce interference.

• Calluses and hand lotion may act as an insulating layer to reduce the signal strength.

• Some Electrocardiogram (EKG) signals generated by individuals are not strong enough to be detected by the sensors.

•

connectivity which allows it to work with a number of digital partners. For

compatible model. (Coded

OwnCode

chest straps

enabled strap

INCLINE

Table of Contents