Nautilus Schwinn 470 Assembly Manual / Owner's Manual page 33

9. The Console will go to the Power-Up Mode screen with the user selected.
Reset a User Profile
1. From the Power-Up Mode screen, push the User button
2. Push the OK button to select it.
3. The Console display shows the current User Profile name and the EDIT prompt. Push the Increase( ) or Decrease( )
buttons to change the prompt.
Note:
Mode screen.
4. The Console display shows the RESET prompt and the current User Profile name. Push OK to start the Reset User
5. The Console will now confirm the request to reset the User profile (the default selection is 'NO'). Push the Increase( )
or Decrease( ) buttons to adjust the selection.
6. Push OK to make your selection.
Changing Resistance Levels
Push the Resistance Level Increase( ) or Decrease( ) buttons to change the resistance level at any time in a workout
program. To rapidly change the resistance level, push the desired Resistance Level Quick Button. The Console will adjust
to the selected resistance level of the quick button.
Changing Incline Levels
Push the Incline Level Increase( ) or Decrease( ) buttons to change the incline
angle of the rail assembly at any time in a workout program. To rapidly change the
incline level, push the desired Incline Level Quick Button. The Console will adjust to
the selected incline level of the quick button.
Be sure the area below the machine is clear before lowering. Fully lower
the Incline Assembly after each workout.
anticipate that changes in speed, incline angle and resistance level can
occur during workouts, and be attentive in order to avoid loss of balance
and possible injury.
Note: Be sure that the workout space you are utilizing has adequate height clearance, taking into consideration the
Profile Programs
(Fun Rides, Mountains, and Challenges).
Note:
Categories.
.
Power-Up
33