Advertisement
7. Calibrate the incline system.
To calibrate the incline system, touch Maintenance,
touch Calibrate Incline, and then touch Begin. The
frame will automatically rise to the maximum incline
level, lower to the minimum incline level, and then
return to the starting position. This will calibrate
the incline system. When the incline system is
calibrated, touch Finish.
IMPORTANT: Keep pets, feet, and other objects
away from the treadmill while the incline sys-
tem is calibrating. In an emergency, remove
the key from the console to stop the incline
calibration.
Note: The incline system may occasionally
calibrate automatically when you turn on the
treadmill. Wait for the frame to stop moving
before you attempt to use the treadmill.
8. Exit the settings main menu.
To exit the settings main menu, touch the back
button (arrow symbol).
HOW TO CONNECT TO A WIRELESS NETWORK
To use iFIT workouts and to use several other features
of the console, the console must be connected to a
wireless network.
1. Select the home screen.
First, turn on the console and insert the key into the
console (see HOW TO TURN ON THE CONSOLE
on page 16). Note: It may take up to a few min-
utes for the console to be ready for use.
Next, select the home screen (Home button). When
you turn on the console, the home screen will
appear after the console boots up. If a workout is
selected, touch the screen and follow the prompts
to end the workout and return to the home screen.
If a settings menu is selected, touch the back but-
ton (arrow symbol) to return to the home screen.
2. Select the wireless network menu.
Touch the menu button (three horizontal lines sym-
bol), and then touch Wi-Fi to select the wireless
network menu.
3. Enable Wi-Fi
®
.
Make sure that Wi-Fi is enabled. If it is not enabled,
touch the Wi-Fi toggle to enable it.
4. Set up and manage a wireless network
connection.
When Wi-Fi is enabled, the screen will show a
list of available networks. Note: It may take a few
moments for the list of wireless networks to appear.
Note: You must have your own wireless network
and an 802.11b/g/n router with SSID broadcast
enabled (hidden networks are not supported).
When a list of networks appears, touch the desired
network. Note: You will need to know your network
name (SSID). If your network has a password, you
will also need to know the password.
Follow the prompts on the screen to enter your
password and connect to the selected wireless
network. (To use the keyboard, see HOW TO USE
THE TOUCH SCREEN on page 16.)
When the console is connected to your wireless
network, a confirmation message will appear on the
screen.
If you are having problems connecting to an
encrypted network, make sure that your password
is correct. Note: Passwords are case-sensitive.
Note: The console supports unsecured and
secured (WEP, WPA™, and WPA2™) encryption.
A broadband connection is recommended; perfor-
mance depends on connection speed.
Note: If you have questions after follow-
ing these instructions, go to my.iFIT.com for
assistance.
5. Exit the wireless network menu.
To exit the wireless network menu, touch the back
button (arrow symbol).
24
4. Check for firmware updates.
Touch the menu button (three horizontal lines sym-
bol), touch Settings, touch Maintenance, and then
touch Update. The console will check for firmware
updates. For more information, see step 6 on
page 23.
Firmware updates are always designed to
improve your exercise experience. As a result,
new settings and features may not be described
in this manual. Also, some settings and features
described in this manual may no longer be
enabled. Take time to explore the console to learn
how new settings and features work.
5. Calibrate the incline system.
Touch the menu button (three horizontal lines
symbol), touch Settings, touch Maintenance, and
then touch Calibrate Incline and follow the prompts
on the screen. The frame will rise and lower as it
calibrates. For more information, see step 7 on
page 25.
The console is now ready for you to begin working out.
The following pages explain the workouts and other
features that the console offers.
To use the manual mode, see this page. To use a
featured workout, see page 19. To create a draw-
your-own-map workout, see page 20. To use an iFIT
workout, see page 21.
To change console settings, see page 23. To
connect to a wireless network, see page 24.
IMPORTANT: If there are sheets of plastic on the
console, remove the plastic. To prevent damage
to the walking platform, wear clean athletic shoes
while using the treadmill. The first time you use
the treadmill, observe the alignment of the walking
belt, and center the walking belt if necessary (see
page 28).
HOW TO USE THE MANUAL MODE
1. Insert the key into the console.
See HOW TO TURN ON THE CONSOLE on
page 16. Note: It may take up to a few minutes
for the console to be ready for use.
2. Select the home screen.
When you turn on the console, the home screen
will appear after the console boots up.
If a workout is selected, touch the screen and fol-
low the prompts to end the workout and return to
the home screen. If a settings menu is selected,
touch the back button (arrow symbol) to return to
the home screen.
3. Get ready for the workout.
Touch Manual Start on the screen or press the
Start button on the console to start the walking belt.
The walking belt will start to move at a low speed
and a warm-up period will begin.
To adjust the fan, see HOW TO USE THE FAN
on page 25.
To use a heart rate monitor, see HOW TO USE
AN OPTIONAL HEART RATE MONITOR on
page 25.
4. Change the speed of the treadmill as desired.
You can change the speed of the walking belt in
the following ways:
Speed increase and decrease buttons on the
console—Each time you press a button, the speed
setting will change in small increments; if you hold
down the button, the speed setting will change
more quickly.
Numbered speed buttons on the console—Each
time you press a button, the walking belt will gradu-
ally change speed until it reaches the selected
speed setting. To select a speed setting that
includes a decimal—such as 3.5 mph—press two
numbered buttons in succession. For example, to
select a speed setting of 3.5 mph, press the 3 but-
ton and then immediately press the 5 button. Note:
This feature will not function when the console is
set to metric units.
17
Advertisement
