MQ Power WHISPERWATT DCA600SSV4F3 Operation Manual page 48

EMERGENCY SHUTDOWN PROCEDURE
NOTICE
The Emergency Stop switch should only be used
to stop the engine in case of an emergency or to lock
out operation during service. The Emergency Stop
switch should NEVER be used for routine stopping of
the engine.
1. To stop the engine in the event of an emergency, push
the Emergency Stop switch (Figure 78). This switch is
located on the side of the generator next to the output
terminal panel.
EMERGENCY
STOP SWITCH
OUTPUT
TERMINAL PANEL
Figure 78. Emergency Stop Switch
2. Press the Main Circuit Breaker OFF switch (Figure 73).
3. Verify that the Main Circuit Breaker OFF lamp
(Figure 74) is lit (ON).
PAGE 48 — DCA600SSV4F3 60 HZ GENERATOR • OPERATION MANUAL — REV. #2 (11/15/22)
GENERATOR SHUTDOWN PROCEDURES