Table of Contents
Advertisement
26
GETTING TO KNOW YOUR VEHICLE
P
T
M
ROGRAMMING
HE
EMORY
To create a new memory profile, perform the following:
NOTE:
Saving a new memory profile will erase the selected profile
from memory.
1.
Place the vehicle's ignition in the ON/RUN position
(do not start the engine).
2.
Adjust all memory profile settings to desired
preferences (i.e., seat, side mirror, power tilt and
telescopic steering column [if equipped], and radio
station presets).
3.
Push the set (S) button on the memory switch, and
then push the desired memory button (1 or 2) within
five seconds. The instrument cluster display will
display which memory position has been set.
NOTE:
Memory profiles can be set without the vehicle in PARK,
but the vehicle must be in PARK to recall a memory profile.
F
L
A
EATURE
INKING
ND
K
E
EYLESS
NTRY
Your key fobs can be programmed to recall one of two
saved memory profiles.
NOTE:
Before programming your key fobs you must select the
"Personal Settings Linked To Fob" feature through the
Uconnect Settings
Ú
To program your key fobs, perform the following:
1.
Place the vehicle's ignition in the OFF position.
2.
Select a desired memory profile, 1 or 2.
3.
Once the profile has been recalled, push and release
the set (S) button on the memory switch. Then, within
five seconds, push and release button (1) or (2)
accordingly. "Memory Profile Set" (1 or 2) will display
in the instrument cluster display.
4.
Push and release the lock button on the key fob
within 10 seconds.
NOTE:
Your key fobs can be unlinked from your memory settings
by pushing the set (S) button, and within 10 seconds,
followed by pushing the unlock button on the key fob.
U
T
R
NLINKING
HE
EMOTE
K
F
T
M
EY
OB
O
EMORY
page 135.
M
P
R
EMORY
OSITION
ECALL
NOTE:
If a recall is attempted when the vehicle is not in PARK, a
message will be displayed in the instrument cluster
display.
To recall the memory settings for driver one or two, push
the desired memory button (1 or 2) or the unlock button
on the key fob linked to the desired memory position.
A recall can be canceled by pushing any of the memory
buttons during a recall (S, 1, or 2), or by pushing any of the
seat adjustment switches. When a recall is canceled, the
driver's seat and telescopic steering column (if equipped)
will stop moving. A delay of one second will occur before
another recall can be selected.
SEATS
Seats are a part of the Occupant Restraint system of the
vehicle.
WARNING!
It is dangerous to ride in a cargo area, inside or
outside of a vehicle. In a collision, people riding in
these areas are more likely to be seriously injured or
killed.
Do not allow people to ride in any area of your vehicle
that is not equipped with seats and seat belts. In a
collision, people riding in these areas are more likely
to be seriously injured or killed.
Be sure everyone in your vehicle is in a seat and
using a seat belt properly.
Advertisement
Table of Contents
