Heated Steering Wheel - If Equipped; Driver Memory Settings - If Equipped - Dodge DURANGO 2022 Owner's Manual

Use the four-way control to adjust the steering column.
NOTE:
For vehicles equipped with Driver Memory Settings
page 25, you can use your key fob or the memory switch
Ú
on the driver's door trim panel to return the tilt/telescopic
steering column to saved positions.
WARNING!
Do not adjust the steering column while driving.
Adjusting the steering column while driving or driving
with the steering column unlocked, could cause the
driver to lose control of the vehicle. Failure to follow this
warning may result in serious injury or death.
H S W
EATED TEERING HEEL
I E
F QUIPPED
The steering wheel contains a heating
element that helps warm your hands in cold
weather. The heated steering wheel has only
one temperature setting. Once the heated
steering wheel has been turned on, it will stay
on until the operator turns it off. The heated steering
wheel may not turn on when it is already warm.
The heated steering wheel control button is located on the
center stack below the radio screen, or within the
Uconnect system.
 Press the heated steering wheel button once to turn
the heating element on.
 Press the heated steering wheel button a second time
to turn the heating element off.
NOTE:
The engine must be running for the heated steering wheel
to operate.
For information on use with the Remote Start system, see
page 19.
Ú
 Persons who are unable to feel pain to the skin
because of advanced age, chronic illness, diabetes,
spinal cord injury, medication, alcohol use, exhaus-
tion, or other physical conditions must exercise care
when using the steering wheel heater. It may cause
burns even at low temperatures, especially if used
—
for long periods.
 Do not place anything on the steering wheel that
insulates against heat, such as a blanket or steering
wheel covers of any type and material. This may
cause the steering wheel heater to overheat.
DRIVER MEMORY SETTINGS — IF EQUIPPED
This feature allows the driver to save up to two different
memory profiles for easy recall through a memory switch.
Each memory profile saves desired position settings for
the following features:
 Driver seat
 Easy Entry/Exit seat (if equipped)
WARNING!
GETTING TO KNOW YOUR VEHICLE
 Side mirrors
 Power tilt and telescopic steering column (if equipped)
 A set of desired radio station presets
NOTE:
 Your vehicle is equipped with two key fobs, each can be
linked to either memory position 1 or 2.
 Be sure to program the radio presets prior to program-
ming the memory settings.
The memory setting switch is located on the driver's door
trim panel. The switch consists of three buttons:
 The set (S) button, which is used to activate the
memory save function.
 The (1) and (2) buttons which are used to recall either
of two saved memory profiles.
Memory Setting Buttons
25
2