Table of Contents
Advertisement
22
GETTING TO KNOW YOUR VEHICLE
To Unlock From The Driver Or Passenger Side:
With a valid Passive Entry key fob within 5 ft (1.5 m) of the
door handle, grab the handle to unlock the vehicle.
Grabbing the driver's door handle will unlock the driver
door automatically. Grabbing the passenger door handle
will unlock all doors and the liftgate automatically. The
interior door panel lock knob will raise when the door is
unlocked.
Grab The Door Handle To Unlock
NOTE:
Either the driver door only or all doors will unlock when you
grab hold of the front driver's door handle, depending on
the selected setting in the Uconnect system
Preventing Inadvertent Locking Of Passive Entry Key Fob
In Vehicle
To minimize the possibility of unintentionally locking a
Passive Entry key fob inside your vehicle, the Passive Entry
system is equipped with an automatic door unlock
feature, which will function if the ignition is in the OFF
position.
If one of the vehicle doors is open, and the door panel
switch is used to lock the vehicle, once all open doors have
been closed, the vehicle checks the inside and outside of
the vehicle for any valid Passive Entry key fob. If one of the
vehicle's Passive Entry key fobs is detected inside the
vehicle, and no other valid Passive Entry key fobs are
detected outside the vehicle, the Passive Entry system
automatically unlocks all vehicle doors and chirps the
horn three times (on the third attempt, ALL doors will lock,
and the Passive Entry key fob can be locked in the
vehicle).
To Unlock/Enter The Liftgate
The liftgate Passive Entry unlock feature is built into the
electronic liftgate handle. With a valid Passive Entry key
fob within 5 ft (1.5 m) of the liftgate, pull the electronic
liftgate handle for a power open on vehicles equipped with
a power liftgate. Pull the electronic liftgate handle and lift
for manual liftgate vehicles.
NOTE:
If the vehicle is unlocked, the liftgate will open with the
handle and no key fob is required.
The liftgate will either unlock along with the vehicle
doors, or it will need to be unlocked by pushing the
electronic liftgate release, depending on the selected
page 135.
Ú
setting in the Uconnect system
The liftgate (and vehicle doors if unlocked) must be
locked using the lock button on the key fob, the Passive
Entry lock button, or the lock buttons on the interior
front door panels.
1 — Electronic Release Switch
2 — Lock Button Location
To Lock The Liftgate
With a valid Passive Entry key fob within 5 ft (1.5 m) of the
liftgate, push the Passive Entry lock button located to the
right of electronic liftgate handle.
NOTE:
When you push the button on the liftgate, either only the
liftgate will unlock or all doors and the liftgate will unlock,
depending on the selected setting in the Uconnect system
page 135.
Ú
page 135.
Ú
To Lock The Vehicle's Doors And Liftgate
With one of the vehicle's Passive Entry key fobs within 5 ft
(1.5 m) of the driver or passenger front door handle, push
the door handle lock button to lock all four doors and
liftgate.
Electronic Liftgate Handle
Advertisement
Table of Contents
