Table of Contents
Advertisement
NOTE:
For vehicles equipped with Driver Memory Settings, use
the key fob or the memory switch on the driver's door
trim panel to return the tilt/telescopic steering column
to saved positions
page 25.
WARNING!
Do not adjust the steering column while driving.
Adjusting the steering column while driving or driving
with the steering column unlocked, could cause the
driver to lose control of the vehicle. Failure to follow
this warning may result in serious injury or death.
HEATED STEERING WHEEL —
IF EQUIPPED
The steering wheel contains a heating ele-
ment that helps warm your hands in cold
weather. The heated steering wheel has only
one temperature setting. Once the heated
steering wheel has been turned on, it will stay on until
the operator turns it off. The heated steering wheel may
not turn on when it is already warm.
The heated steering wheel button is located within the
Uconnect system and, if equipped, on the instrument
panel below the radio. You can access the button
through the Climate or Controls menu of the
touchscreen.
•
Press the heated steering wheel button once to turn
the heating element on.
•
Press the heated steering wheel button a second
time to turn the heating element off.
NOTE:
The engine must be running for the heated steering
wheel to operate.
For information on use with the Remote Start system,
see
page 19.
WARNING!
•
Persons who are unable to feel pain to the skin
because of advanced age, chronic illness, diabe-
tes, spinal cord injury, medication, alcohol use,
exhaustion, or other physical conditions must exer-
cise care when using the steering wheel heater. It
may cause burns even at low temperatures, espe-
cially if used for long periods.
•
Do not place anything on the steering wheel that
insulates against heat, such as a blanket or steer-
ing wheel covers of any type of material. This may
cause the steering wheel heater to overheat.
DRIVER MEMORY SETTINGS —
IF EQUIPPED
This feature allows the driver to save up to two different
memory profiles for easy recall through a memory
switch. Each memory profile saves desired position set-
tings for the following features:
•
Driver seat
•
Easy Entry/Exit seat (if equipped)
•
Side mirrors
•
Power tilt and telescopic steering column
(if equipped)
•
A set of desired radio station presets
GETTING TO KNOW YOUR VEHICLE
NOTE:
•
Your vehicle is equipped with two key fobs, each can
be linked to either memory position 1 or 2.
•
Be sure to program the radio presets prior to pro-
gramming the memory settings.
The memory setting switch is located on the driver's
door trim panel. The switch consists of three buttons:
•
The set (S) button, which is used to activate the
memory save function.
•
The (1) and (2) buttons which are used to recall
either of two saved memory profiles.
Memory Setting Buttons
PROGRAMMING THE MEMORY
FEATURE
To create a new memory profile, perform the following:
NOTE:
Saving a new memory profile will erase the selected
profile from memory.
25
2
Advertisement
Table of Contents
