Driver Memory Seat - If Equipped; Programming The Memory Feature - Dodge Charger SRT Hellcat 392 2016 Owner's Manual

146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
DRIVER MEMORY SEAT — IF EQUIPPED
This feature allows the driver to store up to two different
memory profiles for easy recall through a memory
switch. Each memory profile contains desired position
settings for the driver seat, side mirrors, adjustable
pedals (if equipped), and power tilt and telescopic steer-
ing column (if equipped) and a set of desired radio
station presets. Your remote keyless entry key fob can
also be programmed to recall the same positions when
the UNLOCK button is pushed.
NOTE: If your vehicle is equipped with two key fobs,
one key fob can be linked to memory position 1 and the
other key fob can be linked to memory position 2.
The memory seat switch is located on the driver's door
trim panel. The switch consists of three buttons: The (S)
button, which is used to activate the memory save
function and the (1) and (2) buttons which are used to
recall either of two pre-programmed memory profiles.
Memory Seat Switches

Programming The Memory Feature

NOTE: Saving a new memory profile will erase an
existing profile from memory.
To create a new memory profile, perform the following:
1. Place the vehicles ignition to the ON/RUN position.