Table of Contents
Advertisement
passenger temperature, mode, or blower settings while in
SYNC will automatically exit this feature.
NOTE:
The SYNC setting is only available on the touchscreen.
REAR BLOWER CONTROL
Rear Blower Control is used to regulate the
amount of air forced through the rear climate
system. There are seven blower speeds
available. The speeds can be selected using
the buttons on the touchscreen. Use the small
blower icon (or blower icon with the downward arrow) to
reduce the blower setting, and the large blower icon (or
blower icon with the upward arrow) to increase the blower
setting. Blower can also be selected by pressing the
blower bar area between the icons.
REAR MODE CONTROL
Select Mode by pressing one of the Mode
buttons on the touchscreen to change the
airflow distribution mode. The rear airflow
distribution mode can be adjusted so air
comes from the headliner outlets, the floor
outlets or both.
HEADLINER MODE
Air comes from the outlets in the headliner.
Each of these outlets can be individually
adjusted to direct the flow of air. Moving the
air vanes of the outlets to one side shuts off
the airflow.
BI-LEVEL MODE
Press this button on the touchscreen to
change the air distribution mode to Bi-Level
Mode. In Bi-Level Mode, air comes from both
the headliner outlets and the floor outlets.
NOTE:
In many temperature positions, the Bi-Level mode is
designed to provide cooler air out of the headliner outlets
and warmer air from the floor outlets.
FLOOR MODE
Press this button on the touchscreen to
change the air distribution mode to Floor
Mode. In Floor Mode, air comes from the floor
outlets.
REAR CLIMATE CONTROL OFF BUTTON
To manually set the rear blower controls to off,
press the Rear Climate Control/Blower Off
button.
GETTING TO KNOW YOUR VEHICLE
Rear Automatic Temperature Control
The rear system temperature control buttons are located
on the headliner on the passenger side of the vehicle.
Rear Automatic Climate Controls
The rear ATC system has floor air outlets at the rear right
side of the third row seats and overhead outlets at each
outboard rear seating position. The system provides
heated air through the floor outlets or cool, dehumidified
air through the headliner outlets.
AUTO BUTTON
Turn the blower knob to the AUTO setting. This
feature automatically controls the rear interior
cabin temperature by adjusting airflow
distribution and amount. Changing the blower
knob to any other blower setting will cause the
rear system to switch to manual mode
53
2
page 54.
Ú
Advertisement
Table of Contents
