Page 1 O W N E R ’ S M A N U A L 2 0 2 4 D U R A N G O...
Page 2 ROADSIDE ASSISTANCE This Owner’s Manual illustrates and describes the operation of features and equipment that are either standard 24 HOURS, 7 DAYS A WEEK AT YOUR SERVICE. or optional on this vehicle. This manual may also include a description of features and equipment that are no longer available or were not ordered on this vehicle.
Page 3: Table Of Contents
TABLE OF CONTENTS INTRODUCTION ................7 GETTING TO KNOW YOUR VEHICLE .
Page 4 INTRODUCTION Automatic Unlock On Exit Feature — Outside Mirrors With Turn Signal — If Equipped . 37 If Equipped ..... 23 Outside Automatic Dimming Mirror —...
Page 5 Automatic Headlight Leveling — If Equipped . . . 43 Sunroof Maintenance ....62 White Indicator Lights ....85 Battery Saver .
Page 6 DRIVING TIPS..... . 133 Electronically Shifted Transfer Case — Cleaning The ParkSense System ..116 On-Road Driving Tips .
Page 7 Connected Services Vehicle Finder FAQs ..177 SAFETY Run Flat Tires — If Equipped ... 240 Connected Services Stolen Vehicle Assistance Jack Location — If Equipped ... 240 SAFETY FEATURES.
Page 8 BODYWORK..... . . 298 ENGINE FLUIDS AND LUBRICANTS — SRT ..306 Maintenance-Free Battery ... . 263 Protection From Atmospheric Agents .
Page 9: Introduction
FCA US LLC aims at a constant improvement of the vehicles produced. For this reason, it reserves the right to make changes to the model described for technical and/or commercial reasons. For further information, contact an authorized dealer. When it comes to service remember that authorized dealers know your Dodge best, have factory-trained technicians, genuine Mopar® parts, and care about your satisfaction.
Page 10: Symbols Key
INTRODUCTION SYMBOLS KEY ROLLOVER WARNING Utility vehicles have a significantly higher rollover rate than other types of vehicles. This vehicle has a higher ground clearance and a higher center of gravity than many pas- WARNING! These statements apply to operating pro- senger vehicles.
Page 11: Vehicle Modifications/Alterations
INTRODUCTION VEHICLE MODIFICATIONS/ALTERATIONS Red Warning Lights Battery Charge Warning Light WARNING! page 79 Any modifications or alterations to this vehicle could seriously affect its roadworthi- ness and safety and may lead to a collision resulting in serious injury or death. Door Open Warning Light SYMBOL GLOSSARY page 79...
Page 12 INTRODUCTION Red Warning Lights Yellow Warning Lights Liftgate Open Warning Light Engine Check/Malfunction Indicator Warning Light (MIL) page 80 page 82 Electronic Stability Control (ESC) Active Warning Light Oil Pressure Warning Light page 80 page 81 Oil Temperature Warning Light Electronic Stability Control (ESC) OFF Warning Light page 80 page 81...
Page 13 INTRODUCTION Yellow Warning Lights Yellow Warning Lights Anti-Lock Brake System (ABS) Warning Light Service LaneSense Warning Light page 81 page 81 Service Forward Collision Warning (FCW) Light Cruise Control Fault Warning Light page 82 page 82 Yellow Indicator Lights Service Adaptive Cruise Control (ACC) Warning Light page 82 Forward Collision Warning (FCW) OFF Indicator Light page 83...
Page 14 INTRODUCTION Green Indicator Lights Green Indicator Lights Adaptive Cruise Control (ACC) Set With Target Indicator Light Snow Mode Indicator Light page 84 page 84 Sport Mode Indicator Light Adaptive Cruise Control (ACC) Set Without Target Indicator Light page 84 page 84 ECO Mode Indicator Light Sport Mode Indicator Light page 84...
Page 15 INTRODUCTION Green Indicator Lights White Indicator Lights Turn Signal Indicator Lights Valet Mode SRT Indicator Light page 84 page 85 White Indicator Lights Blue Indicator Lights Adaptive Cruise Control (ACC) Ready Indicator Light High Beam Indicator Light page 85 page 85 Custom Mode SRT Indicator Light page 85 Cruise Control Ready Indicator Light...
Page 16: Getting To Know Your Vehicle
GETTING TO KNOW YOUR VEHICLE To Lock/Unlock The Doors And Liftgate KEYS Push and release the unlock button on the key fob once to unlock the driver’s door, or twice within five seconds KEY FOB to unlock all the doors and the liftgate. To lock all the doors and the liftgate, push the lock button once.
Page 17 GETTING TO KNOW YOUR VEHICLE The vehicle’s horn will rapidly chirp three times along with a single flash of the vehicle’s exterior lights. NOTE: • The doors have to be open and then closed in order for the vehicle to detect a key fob. The Key Left Vehicle feature will activate when the first door is closed and no key fob is detected in the vehicle.
Page 18: Sentry Key
GETTING TO KNOW YOUR VEHICLE 4. To assemble the key fob case, snap the two halves The system uses a key fob, keyless push button ignition WARNING! together. and a Radio Frequency (RF) receiver to prevent unau- thorized vehicle operation. Therefore, only key fobs that •...
Page 19: Ignition Switch
GETTING TO KNOW YOUR VEHICLE IGNITION SWITCH WARNING! • Engine is not started • • Before exiting a vehicle, always shift the automatic Some electrical devices are available (e.g. power KEYLESS ENTER ‘N GO™ IGNITION transmission into PARK and apply the parking windows, etc.) brake.
Page 20: Remote Start - If Equipped
GETTING TO KNOW YOUR VEHICLE • • When opening the driver's door with the ignition in HOW TO USE REMOTE START Hazard switch off ON/RUN (engine not running), a chime will sound to • Brake pedal not pressed Push and release the Remote Start button on the key remind you to place the ignition in the OFF position.
Page 21: Remote Start Front Defrost Activation
GETTING TO KNOW YOUR VEHICLE NOTE: The Remote Start system will turn the engine off if the REMOTE START COMFORT Remote Start button on the key fob is pushed again, or These features will stay on through the duration of SYSTEMS —...
Page 22: Vehicle Security System - If Equipped
GETTING TO KNOW YOUR VEHICLE TO DISARM THE SYSTEM you are in the vehicle or not. If you remain in the vehicle VEHICLE SECURITY SYSTEM — and open a door, the alarm will sound. If this occurs, The Vehicle Security system can be disarmed using any disarm the Vehicle Security system.
Page 23: Power Door Locks
GETTING TO KNOW YOUR VEHICLE NOTE: inside door handle to the first detent. To unlock the rear WARNING! doors, pull the door lock knob on the door trim panel If the key fob is located next to a mobile phone, laptop, upward.
Page 24 GETTING TO KNOW YOUR VEHICLE • Passive Entry Unlock initiates illuminated approach doors and chirps the horn three times (on the third (low beams, license plate lamp, position lamps) for attempt, ALL doors will lock, and the Passive Entry key whichever duration is set between 0, 30, 60 or fob can be locked in the vehicle).
Page 25: Automatic Unlock On Exit Feature
GETTING TO KNOW YOUR VEHICLE NOTE: NOTE: This feature will cause the horn to chirp when the doors • After pushing the door handle button, you must wait are locked with the door handle lock button. This fea- two seconds before you can lock or unlock the ture can be turned on or off within Uconnect Settings doors, using either Passive Entry door handle or page 135.
Page 26: Steering Wheel
GETTING TO KNOW YOUR VEHICLE STEERING WHEEL WARNING! Do not adjust the steering column while driving. MANUAL TILT/TELESCOPING Adjusting the steering column while driving or driving STEERING COLUMN — IF EQUIPPED with the steering column unlocked, could cause the driver to lose control of the vehicle. Failure to follow This feature allows you to tilt the steering column this warning may result in serious injury or death.
Page 27: If Equipped
GETTING TO KNOW YOUR VEHICLE NOTE: NOTE: NOTE: For vehicles equipped with Driver Memory Settings, use The engine must be running for the heated steering • Your vehicle is equipped with two key fobs, each can the key fob or the memory switch on the driver's door wheel to operate.
Page 28: Linking And Unlinking The Remote Keyless
GETTING TO KNOW YOUR VEHICLE 1. Place the vehicle’s ignition in the ON/RUN position 3. Once the profile has been recalled, push and SEATS (do not start the engine). release the set (S) button on the memory switch. Then, within five seconds, push and release button Seats are a part of the Occupant Restraint system of 2.
Page 29 GETTING TO KNOW YOUR VEHICLE Manual Front Passenger Seat Front Passenger Seat Fold-Flat WARNING! Forward/Rearward Adjustment Feature — If Equipped • Seats should be adjusted before fastening the seat Some models may be equipped with a manual front To fold the seatback to the flat load-floor position, lift belts and while the vehicle is parked.
Page 30: Manual Adjustment (Rear Seats)
GETTING TO KNOW YOUR VEHICLE EASY ACCESS FOR THIRD ROW CAUTION! Either side of the rear seat can be tumbled forward to Do not place any article under a power seat or allow passengers to easily access the third row seats. impede its ability to move as it may cause damage to 1.
Page 31 GETTING TO KNOW YOUR VEHICLE Rear Captain’s Chairs — If Equipped NOTE: You may experience deformation in the seat cushion SECOND ROW CAPTAIN’S CHAIRS FOLD-FLAT from the seat belt buckles if the seats are left folded for SEATS an extended period of time. This is normal and by sim- ply unfolding the seats to the open position, over time The second row seats can be folded flat to carry cargo.
Page 32 GETTING TO KNOW YOUR VEHICLE Tumble Strap Mini Console Stepping Pad Release Handles TO RAISE REAR SEAT WARNING! Fold the seat rearward to its original position, and lock Do not drive the vehicle with the second row seats in it into place. Then lift the head restraint until it locks the tumbled position.
Page 33: Power Adjustment (Front Seats) - If Equipped
GETTING TO KNOW YOUR VEHICLE Tilting The Seat Up Or Down NOTE: You may experience deformation in the seat cushion The angle of the seat cushion can be adjusted in two from the seat belt buckles if the seats are left folded for directions.
Page 34: Heated Seats - If Equipped
GETTING TO KNOW YOUR VEHICLE The distance the driver seat moves depends on where WARNING! CAUTION! you have the driver seat positioned when you place the vehicle’s ignition in the OFF position. • Do not place anything on the seat or seatback that Do not place any article under a power seat or •...
Page 35: Front Ventilated Seats - If Equipped
GETTING TO KNOW YOUR VEHICLE Rear Heated Seats — If Equipped Front Head Restraints • Press the ventilated seat switch a third time to choose LO. The two second row outboard seats may be Your vehicle is equipped with front four-way driver and •...
Page 36 GETTING TO KNOW YOUR VEHICLE Head Restraint Removal — Rear Seats The center head restraint has limited adjustment. Lift upward on the head restraint to raise it or push down- The center head restraint can be adjusted when occu- ward on the head restraint to lower it. pied, or removed for Child Seat Tethering.
Page 37: Uconnect Voice Recognition - If Equipped
Voice Command. You can also say the vehicle Wake using the Headrest Fold button. The head restraints Up word and state your command. Some examples must be raised manually when occupying the third of Wake Up words include “Hey Uconnect” or “Hey row. Dodge”.
Page 38: Additional Information
GETTING TO KNOW YOUR VEHICLE • A passenger can press the VR button shortcut on ADDITIONAL INFORMATION You can turn the feature on or off by pushing the button the radio status bar to also issue a command. at the base of the mirror. A light in the button will illumi- ©...
Page 39: Outside Mirrors
GETTING TO KNOW YOUR VEHICLE Sun Visor Slide-On-Rod Feature — Outside Mirrors Folding Feature POWER MIRRORS — IF EQUIPPED If Equipped All outside mirrors are hinged and may be moved either The power mirror switch is located on the driver's side forward or rearward to resist damage.
Page 40: Heated Mirrors - If Equipped
GETTING TO KNOW YOUR VEHICLE • HEATED MIRRORS — IF EQUIPPED The HomeLink® buttons that are located in the 2. Push and hold the two outside HomeLink® buttons overhead console or sun visor designate the three (I and III) for up to 20 seconds, or until the These mirrors are heated to melt frost or ice.
Page 41: Programming Homelink® To A Garage Door
GETTING TO KNOW YOUR VEHICLE PROGRAMMING HOMELINK® TO A 1. At the garage door opener motor (in the garage), WARNING! locate the “LEARN” or “TRAIN” button. This can usu- GARAGE DOOR OPENER ally be found where the hanging antenna wire is Carbon monoxide is poisonous when inhaled and attached to the garage door opener motor.
Page 42: Canadian/Gate Operator Programming
GETTING TO KNOW YOUR VEHICLE 1. Place the ignition in the ON/RUN position, without 2. Place the hand-held transmitter 1 to 3 inches (3 to 2. Press and hold the desired HomeLink® button until starting the engine. 8 cm) away from the HomeLink® button you wish to the indicator light begins to flash after 20 seconds.
Page 43: Exterior Lights
GETTING TO KNOW YOUR VEHICLE HEADLIGHT SWITCH WARNING! The headlight switch is located on the left side of the • Vehicle exhaust contains carbon monoxide, a dan- instrument panel, next to the steering wheel. The head- gerous gas. Do not run your vehicle in the garage light switch controls the operation of the headlights, while programming the transmitter.
Page 44: Daytime Running Lights (Drls)
GETTING TO KNOW YOUR VEHICLE NOTE: NOTE: NOTE: For vehicles sold in Canada, rotate the headlight switch • • For vehicles sold in Canada, the Daytime Running The Automatic High Beam Headlamp Control can be clockwise from the parking lights and instrument panel Lights will automatically deactivate when the front turned on or off by selecting or deselecting “Auto lights position to the first detent to turn on headlights,...
Page 45: Automatic Headlights
GETTING TO KNOW YOUR VEHICLE AUTOMATIC HEADLIGHTS AUTOMATIC HEADLIGHTS WITH TURN SIGNALS WIPERS This system automatically turns the headlights on or off Move the multifunction lever up or down to activate the according to ambient light levels. To turn the system on, turn signals.
Page 46: Interior Lights
GETTING TO KNOW YOUR VEHICLE If the headlights remain on while the ignition is placed To turn the lights off, push the switch a second time. in the OFF position, the exterior lights will automatically The lights also turn on when a door is opened. The turn off after eight minutes.
Page 47: Dimmer Control
GETTING TO KNOW YOUR VEHICLE DIMMER CONTROL ILLUMINATED ENTRY CAUTION! The brightness of the instrument panel lighting can be When programmed with the Uconnect system, the Always remove any buildup of snow that prevents the regulated by rotating the dimmer control up (brighter) or headlights and courtesy lights will turn on when you use windshield wiper blades from returning to the parked down (dimmer).
Page 48: Rain Sensing Wipers - If Equipped
GETTING TO KNOW YOUR VEHICLE Windshield Washers For information on wiper care and replacement, see The Rain Sensing system has protection features for page 269. the wiper blades and arms, and will not operate under To use the washer, push on the end of the lever (toward the following conditions: the steering wheel) and hold.
Page 49: Climate Controls
GETTING TO KNOW YOUR VEHICLE NOTE: The Air Conditioning (A/C) button allows the operator to manually activate or deactivate the air conditioning sys- As a protective measure, the pump will stop if the tem. When the air conditioning system is turned on, switch is held for more than 20 seconds.
Page 50 GETTING TO KNOW YOUR VEHICLE AUTO Button SYNC Button CAUTION! Press and release this button on the touch- Press the SYNC button on the touchscreen Failure to follow these cautions can cause damage to screen, or push the button on the faceplate, to toggle the SYNC feature on/off.
Page 51 GETTING TO KNOW YOUR VEHICLE Mode Control Mix Mode Select Mode by pressing the Mode button on Air is directed through the floor, defrost, and the faceplate, or one of the Mode buttons on side window demister outlets. This setting the touchscreen to change the airflow distri- works best in cold or snowy conditions that bution mode.
Page 52 GETTING TO KNOW YOUR VEHICLE REAR AUTO BUTTON NOTE: NOTE: The SYNC setting is only available on the touchscreen. In many temperature positions, the Bi-Level mode is Press and release this button on the touch- designed to provide cooler air out of the headliner out- REAR BLOWER CONTROL screen to change the current setting.
Page 53 GETTING TO KNOW YOUR VEHICLE REAR MODE CONTROL REAR TEMPERATURE LOCK The rear ATC system has floor air outlets at the rear right side of the third row seats and overhead outlets at Turn the rear mode knob to adjust airflow The Rear Temperature Lock symbol on the each outboard rear seating position.
Page 54: Automatic Temperature Control (Atc)
GETTING TO KNOW YOUR VEHICLE Manual Operation Override AUTOMATIC TEMPERATURE CAUTION! CONTROL (ATC) This system offers a full complement of manual over- block or place objects directly in front of the inlet ride features. The AUTO symbol in the front ATC display grille or heater outlets.
Page 55: Interior Storage And Equipment
GETTING TO KNOW YOUR VEHICLE Outside Air Intake Front Center Console WEATHER CONTROL SETTINGS Make sure the air intake, located directly in front of the The front center console contains both an upper and a Cold Set the mode control to (Floor windshield, is free of obstructions, such as leaves.
Page 56 GETTING TO KNOW YOUR VEHICLE Sunglasses Bin Door Storage Compartment Latches Storage Compartment Rear Push Button Rear Full Center Console — If Equipped When lifted forward, there is access to the lower stor- 1 — Upper Storage Compartment Latch age compartment. 2 —...
Page 57: Usb/Aux Control
GETTING TO KNOW YOUR VEHICLE Rear Mini Center Console — If Equipped NOTE: When the lower storage compartment is accessed, it An open storage area, or cubby bin with removable allows the armrest to flip forward for Fold-Flat mode. liner, is located in the front of the console. Fold-Flat mode allows the console armrest to be low- ered below the Fold-Flat seat plane and protects the armrest vinyl from damage when using the vehicle to...
Page 58: Lighted Cupholders - If Equipped
GETTING TO KNOW YOUR VEHICLE Using This Feature LIGHTED CUPHOLDERS — IF EQUIPPED By using an external USB device to connect to the USB port: On some vehicles, the front cupholders are equipped • The audio device can be played on the vehicle’s with a light ring that illuminates the cupholders for the sound system, providing metadata (artist, track title, front passengers.
Page 59: Electrical Power Outlets
GETTING TO KNOW YOUR VEHICLE • Do not exceed the maximum power of 160 W (13 Amp) at 12 Volt. If the 160 W (13 Amp) power rating is exceeded the fuse protecting the system needs to be replaced. • Power outlets are designed for accessory plugs only.
Page 60: Power Inverter - If Equipped
GETTING TO KNOW YOUR VEHICLE CAUTION! • Many accessories that can be plugged in draw power from the vehicle's battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle's battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting.
Page 61: Wireless Charging Pad - If Equipped
GETTING TO KNOW YOUR VEHICLE WIRELESS CHARGING PAD — Place the device inside the prepared area delimited in the mat as shown in the image. Incorrect positioning IF EQUIPPED will prevent the phone from charging. LED Indicator Status: • No Light: Charging pad is idle or searching for a device.
Page 62: Windows
GETTING TO KNOW YOUR VEHICLE • iPhone® 12 (including iPod®) is equipped with soft- To open the window part way (manually), push the CAUTION! ware to protect the device from overheating. When switch to the first detent and release it when you want the software is active, the rate of charge is slowed the window to stop.
Page 63: Wind Buffeting
GETTING TO KNOW YOUR VEHICLE Window Lockout Switch POWER SUNROOF — IF EQUIPPED To stop the window from going all the way up during the Auto-Up operation, push down on the switch briefly. The window lockout switch on the driver's door trim If the window runs into any obstacle during Auto-Up, it The power sunroof switch is located between the sun panel allows you to disable the window controls on the...
Page 64: Opening And Closing The Sunroof
GETTING TO KNOW YOUR VEHICLE Venting The Sunroof SUNROOF MAINTENANCE WARNING! Push and release the Vent button within one-half sec- Use only a non-abrasive cleaner and a soft cloth to • Do not allow small children to operate the sunroof. ond and the sunroof will open to the vent position.
Page 65: Closing The Hood
GETTING TO KNOW YOUR VEHICLE LIFTGATE 2. Reach under the hood from outside the vehicle, CLOSING THE HOOD move the safety latch to the left and lift the hood. In one continuous motion, pull down on the front edge of the hood with moderate force until the angle is below POWER LIFTGATE —...
Page 66: Cargo Area Features
GETTING TO KNOW YOUR VEHICLE NOTE: • There are also pinch sensors attached to the side of the liftgate. Light pressure anywhere along these • In the event of a power malfunction to the liftgate, strips will cause the liftgate to return to the open an emergency liftgate latch release can be used to position.
Page 67: Roof Luggage Rack - If Equipped
GETTING TO KNOW YOUR VEHICLE ROOF LUGGAGE RACK — IF EQUIPPED WARNING! WARNING! • The crossbars and side rails are designed to carry In a collision, a loose cargo cover in the vehicle could Cargo tie-downs are not safe anchors for a child weight on vehicles equipped with a luggage rack.
Page 68: Deploying The Crossbars
GETTING TO KNOW YOUR VEHICLE DEPLOYING THE CROSSBARS 4. Position the crossbars across the roof making sure the letters on the crossbars align with the matching 1. Starting with one crossbar, completely loosen the letters on the side rail. thumb screws at both ends of the crossbar. Removing Crossbars CAUTION! Positioning Crossbars...
Page 69: Stowing The Crossbars
GETTING TO KNOW YOUR VEHICLE 6. Deploy and tighten the second crossbar to complete the deployment of the crossbars. Crossbar Pivot Crossbar To Side Rail 3. Position the crossbar along the correct side rail. 5. Once the driver’s side crossbar is in place, tighten Deployed Crossbars Make sure the letters on the crossbar align with the the thumb screws completely.
Page 70 GETTING TO KNOW YOUR VEHICLE CAUTION! • To prevent damage to the roof of your vehicle, DO NOT carry any loads on the roof rack without the crossbars deployed. The load should be secured and placed on top of the crossbars, not directly on the roof.
Page 71: Instrument Cluster
GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER...
Page 72: Getting To Know Your Instrument Panel
GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER CAUTION! DESCRIPTIONS Driving with a hot engine cooling system could dam- age your vehicle. If the temperature gauge reads “H” 1. Tachometer pull over and stop the vehicle. Idle the vehicle with ○...
Page 73: Srt Instrument Cluster
GETTING TO KNOW YOUR INSTRUMENT PANEL SRT INSTRUMENT CLUSTER...
Page 74: Srt Instrument Cluster Descriptions
GETTING TO KNOW YOUR INSTRUMENT PANEL SRT INSTRUMENT CLUSTER working and give you warnings when they are not. The CAUTION! steering wheel mounted controls allow you to scroll DESCRIPTIONS through the main menus and submenus. You can turned off until the pointer drops back into the nor- access the specific information you want and make mal range.
Page 75: Engine Oil Life Reset
GETTING TO KNOW YOUR INSTRUMENT PANEL Down Arrow Button • The system allows the driver to select information by screen. Most of the messages of this type are then pushing the following buttons mounted on the steering Push and release the down stored (as long as the condition that activated it arrow button to wheel:...
Page 76: Display And Messages
GETTING TO KNOW YOUR INSTRUMENT PANEL 2. Push and release the down Secondary Method Of Resetting Engine Oil Life single chime has sounded, to indicate the next sched- arrow button to uled oil change interval. The engine oil change indicator scroll downward through the main menu to “Vehicle 1.
Page 77: Instrument Cluster Display Menu Items
GETTING TO KNOW YOUR INSTRUMENT PANEL Service Air Bag Warning Light Door Open Liftgate Open Hood Open Shift Not Allowed Vehicle Speed Too High To Shift to D Vehicle Speed is Too High to Shift to R Vehicle Speed is Too High to Shift to P Service Transmission Tire Pressure Monitor System Intake Air Temp (SRT) —...
Page 78 GETTING TO KNOW YOUR INSTRUMENT PANEL NOTE: • 1/4 Mile (400 meters) Timer WARNING! ○ Best The Range to empty feature is not able to be reset ○ Last through the instrument cluster display controls. Measurement of vehicle statistics with the Perfor- ○...
Page 79: Battery Saver On/Battery Saver Mode Message - Electrical Load Reduction Actions - If Equipped
GETTING TO KNOW YOUR INSTRUMENT PANEL Defaults Trailer Brake will display the following: Upper Left or Upper Right • • Output Restore None Compass Outside Temp • • Type Cancel Time Range To Empty Fuel Economy • Gain Diagnostics (SRT) — If Equipped (RTE) Average Audio...
Page 80: Warning Lights And Messages
GETTING TO KNOW YOUR INSTRUMENT PANEL ○ In cases when the IBS detects charging system failure, Loss of the battery charge may indicate one or more of Check what may be plugged in to power outlets or the vehicle battery conditions are deteriorating, elec- the following conditions: +12 Volt, 115 Volt AC, USB ports ○...
Page 81: Red Warning Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL RED WARNING LIGHTS brake hydraulic system malfunction or that a problem Operation of the Brake Warning Light can be checked with the Brake Booster has been detected by the Anti- by turning the ignition switch from the OFF position to Seat Belt Reminder Warning Light Lock Brake System (ABS) / Electronic Stability Control the ON/RUN position.
Page 82 GETTING TO KNOW YOUR INSTRUMENT PANEL Electric Power Steering (EPS) Fault Liftgate Open Warning Light ON/RUN or ACC/ON/RUN position and remain on briefly Warning Light as a bulb check. If the light does not come on during This warning light will illuminate when the starting, have the system checked by an authorized liftgate is open.
Page 83: Yellow Warning Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL Transmission Temperature Warning • YELLOW WARNING LIGHTS The ESC OFF Indicator Light and the ESC Indicator Light Light come on momentarily each time the ignition is Anti-Lock Brake System (ABS) Warning placed in the ON/RUN or ACC/ON/RUN position. This warning light will illuminate to warn of a •...
Page 84 GETTING TO KNOW YOUR INSTRUMENT PANEL Low Washer Fluid Warning Light — Service AWD Warning Light — WARNING! If Equipped If Equipped A malfunctioning catalytic converter can reach higher This warning light will illuminate when the This telltale will turn on to indicate the All- temperatures than in normal operating conditions.
Page 85: Yellow Indicator Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL Your vehicle has also been equipped with a TPMS mal- YELLOW INDICATOR LIGHTS CAUTION! function indicator to indicate when the system is not All-Wheel Drive (AWD) Low Indicator operating properly. The TPMS malfunction indicator is Do not continue driving with one or more flat tires as combined with the low tire pressure telltale.
Page 86: Green Indicator Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL LaneSense Indicator Light — If Equipped Stop/Start Active Indicator Light — GREEN INDICATOR LIGHTS If Equipped The LaneSense indicator light illuminates Adaptive Cruise Control (ACC) Set With solid green when both lane markings have This indicator light will illuminate when the Target Indicator Light —...
Page 87: White Indicator Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL SRT Speed Warning Indicator Light — ONBOARD DIAGNOSTIC SYSTEM — OBD II WHITE INDICATOR LIGHTS If Equipped Adaptive Cruise Control (ACC) Ready Your vehicle is equipped with a sophisticated Onboard When Set Speed Warning is turned on, the Indicator Light —...
Page 88: Onboard Diagnostic System (Obd Ii) Cybersecurity
GETTING TO KNOW YOUR INSTRUMENT PANEL ONBOARD DIAGNOSTIC SYSTEM EMISSIONS INSPECTION AND 3. Approximately 15 seconds later, one of two things will happen: (OBD II) CYBERSECURITY ○ MAINTENANCE PROGRAMS The MIL will flash for about 10 seconds and Your vehicle is required to have an OBD II and a connec- then return to being fully illuminated until you tion port to allow access to information related to the turn OFF the ignition or start the engine.
Page 89: Starting And Operating
STARTING AND OPERATING STARTING THE ENGINE AUTOMATIC TRANSMISSION 4. If you wish to stop the cranking of the engine prior to the engine starting, push the ENGINE START/STOP The gear selector must be in the PARK (P) position button again. Before starting your vehicle, adjust your seat, adjust the before you can start the engine.
Page 90: Autopark
STARTING AND OPERATING ENGINE START/STOP Button Functions — With Driver’s If the vehicle is not in PARK and the driver exits the WARNING! Foot Off The Brake Pedal (In PARK Or NEUTRAL vehicle with the engine running, the vehicle may Position) AutoPark.
Page 91: Extended Park Starting
STARTING AND OPERATING 4WD Low — If Equipped 4. If the engine fails to start after eight attempts, allow WARNING! AutoPark will be disabled when operating the vehicle the starter to cool for at least 10 minutes, then in 4WD Low. repeat the procedure.
Page 92: Engine Break-In Recommendations
STARTING AND OPERATING NOTE: Brief full-throttle acceleration within the limits of local It is recommended that the operator observe the follow- traffic laws contributes to a good break-in. Wide-open ing driving behaviors during the new vehicle break-in Check engine oil with every refueling and add if neces- throttle acceleration in low gear can be detrimental and period: sary.
Page 93: Automatic Transmission
STARTING AND OPERATING NOTE: AUTOMATIC TRANSMISSION WARNING! • When the parking brake is applied and the transmis- • When leaving the vehicle, always make sure the You must press and hold the brake pedal while shifting sion is placed in gear, the Brake Warning Light will keyless ignition node is in the OFF position, remove out of PARK.
Page 94: Ignition Park Interlock
STARTING AND OPERATING IGNITION PARK INTERLOCK WARNING! This vehicle is equipped with an Ignition Park Interlock complete stop, then apply the parking brake, shift which requires the transmission to be in PARK (P) the transmission into PARK, and turn the ignition before the ignition can be turned to the OFF position.
Page 95 STARTING AND OPERATING NOTE: PARK (P) • This range supplements the parking brake by locking The transmission electronics are self-calibrating; the transmission. The engine can be started in this therefore, the first few shifts on a new vehicle may range. Never attempt to use PARK while the vehicle is in be somewhat abrupt.
Page 96 STARTING AND OPERATING The following indicators should be used to ensure that in the MANUAL (AutoStick) position will manually select CAUTION! you have properly engaged the transmission into the the transmission gear, and will display the current gear PARK position: in the instrument cluster as 1, 2, 3, etc.
Page 97: Sport Mode - If Equipped
STARTING AND OPERATING 6. Shift into the desired gear range. If the problem is AutoStick mode has the following operational benefits: WARNING! no longer detected, the transmission will return to • The transmission will automatically downshift as the normal operation. vehicle slows (to prevent engine lugging) and will Do not downshift for additional engine braking on a display the current gear.
Page 98: Electronically Shifted Transfer Case - If Equipped
STARTING AND OPERATING NOTE: road surfaces only. Driving in the AWD LOW position on The “SERV AWD” Warning Light monitors the electronic dry, hard surfaced roads may cause increased tire wear shift all-wheel drive system. If this light remains on after This system is not appropriate for conditions where and damage to the driveline components.
Page 99: Shifting Procedure
STARTING AND OPERATING For additional information on the appropriate use of position indicator light will continue to flash until all 2. With the ignition in ON/RUN position and engine each transfer case position, see the following: the requirements for the selected position have running, shift the transmission to NEUTRAL.
Page 100: Guidelines For Track Use
STARTING AND OPERATING • Vehicle suspension will go to SPORT mode. Trailer At the conclusion of each track event, it is recom- Sway Control (TSC) is always enabled in all drive mended that a brake bleed procedure is performed modes provided that the ESC OFF indicator light is to maintain the pedal feel and stopping capability of not illuminated.
Page 101: Selec-Track - If Equipped
STARTING AND OPERATING NOTE: 6. Occasionally, a second burnish session is required. If the brake pads begin to emit an odor during the It is recommended that you target below 42 psi next track session, reduce vehicle speed and brak- (290 kPa) when tires are hot at the conclusion of ing deceleration rate to burnish targets and follow each track session.
Page 102: Custom
STARTING AND OPERATING • TRACK – Track road calibration for use on high trac- • Sport Mode (Available in terrain positions AUTO, CAUTION! tion surfaces. Driveline is maximized for traction. SPORT, CUSTOM and TOW.) — Provides a firm sus- Some binding may be felt on less forgiving surfaces. pension for better handling.
Page 103: Torque Reserve - If Equipped
STARTING AND OPERATING NOTE: launches the car, fuel flow is restored and spark is Initial Conditions: advanced to instantaneously deliver the reserve torque. • Messages will appear in the instrument cluster dis- Make sure the vehicle is not moving For a given launch engine speed, additional torque is play to inform the driver if one or more of the above •...
Page 104: Fuel Saver Technology 5.7L And 6.4L Only
STARTING AND OPERATING NOTE: To Activate The Autostop Mode, The Following Must FUEL SAVER TECHNOLOGY 5.7L AND 6.4L Occur: • Even if the power steering assistance is no longer ONLY — IF EQUIPPED • The system must be in STOP/START READY state. A operational, it is still possible to steer the vehicle.
Page 105: To Start The Engine While In Autostop Mode
STARTING AND OPERATING • • Engine has not reached normal operating Battery voltage drops too low. TO MANUALLY TURN ON THE temperature. • Stop/Start OFF switch is pushed. STOP/START SYSTEM • The transmission is not in a forward gear. • A Stop/Start system error occurs.
Page 106: Cruise Control
STARTING AND OPERATING • Only one Cruise Control feature can operate at a TO MPH (km/h)” will appear indicating what speed was WARNING! time. For example, if Fixed Speed Cruise Control is set. A cruise indicator lamp, along with the set speed, enabled, Adaptive Cruise Control will be unavailable, will also appear and stay on in the instrument cluster Cruise Control can be dangerous where the system...
Page 107: Adaptive Cruise Control (Acc)
STARTING AND OPERATING The Cruise Control system maintains speed up and ADAPTIVE CRUISE CONTROL (ACC) WARNING! down hills. A slight speed change on moderate hills is Adaptive Cruise Control (ACC) increases the driving con- normal. On steep hills, a greater speed loss or gain may safe operation of the vehicle under all road condi- venience provided by Cruise Control while traveling on occur so it may be preferable to drive without Cruise...
Page 108 STARTING AND OPERATING Adaptive Cruise Control (ACC) Menu Activating Adaptive Cruise Control (ACC) WARNING! The instrument cluster display will show the current ACC The minimum set speed for the ACC system is 20 mph • When towing a trailer up or down steep slopes. system settings.
Page 109 STARTING AND OPERATING NOTE: The following conditions will only cancel the ACC WARNING! system: Fixed Speed Cruise Control cannot be set below • 20 mph (32 km/h). Driver seat belt is unbuckled at low speeds Leaving the Adaptive Cruise Control (ACC) system on If either system is set when the vehicle speed is above when not in use is dangerous.
Page 110 STARTING AND OPERATING NOTE: WARNING! When you override and push the SET (+) button or SET (-) button, the new set speed will be the current speed The Resume function should only be used if traffic of the vehicle. and road conditions permit. Resuming a set speed When ACC Is Active: that is too high or too low for prevailing traffic and road conditions could cause the vehicle to accelerate...
Page 111 STARTING AND OPERATING ACC Operation At Stop The vehicle will then maintain the set distance until: This most often occurs at times of poor visibility, such as in snow or heavy rain. The ACC system may also • The vehicle ahead accelerates to a speed above the If the ACC system brings your vehicle to a standstill become temporarily blinded due to obstructions, such set speed.
Page 112 STARTING AND OPERATING When the condition that deactivated the system is no If weather conditions are not a factor, the driver should The following are examples of these types of situations: longer present, the system will return to the “Adaptive examine the windshield and the camera located on the TOWING A TRAILER Cruise Control Off”...
Page 113: Parksense Front/Rear Park Assist System - If Equipped
STARTING AND OPERATING NOTE: STATIONARY OBJECTS AND VEHICLES On tight turns ACC performance may be limited. ACC does not react to stationary objects or vehicles. For USING ACC ON HILLS example, ACC will not react in situations where the vehicle you are following exits your lane and the vehicle ACC performance may be limited when driving on hills.
Page 114: Parksense Sensors
STARTING AND OPERATING NOTE: NOTE: approximately 12 inches (30 cm) up to 47 inches (120 cm) from the front fascia/bumper. The rear sen- • • The driver can disable the automatic braking func- The rear automatic emergency braking system is for sors can detect obstacles from approximately 12 inches tion by turning ParkSense off via the ParkSense emergency braking to avoid an imminent collision.
Page 115 STARTING AND OPERATING Front/Rear ParkSense Arcs 1 — No Tone/Solid Arc 6 — Fast Tone/Flashing Arc 2 — No Tone/Flashing Arc 7 — Fast Tone/Flashing Arc 3 — Fast Tone/Flashing Arc 8 — Slow Tone/Solid Arc 4 — Continuous Tone/Flashing Arc 9 —...
Page 116 STARTING AND OPERATING The vehicle is close to the obstacle when the instrument cluster display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle: WARNING ALERTS FOR REAR Rear Distance Greater than...
Page 117: Parksense Warning Display
STARTING AND OPERATING NOTE: When the ParkSense switch is pressed to disable the When the vehicle is connected to a trailer, the instru- system, the LED light on the switch will be illuminated. ment cluster display will show the "Rear ParkSense If the radio is on, ParkSense will reduce the volume of Unavailable Trailer Connected"...
Page 118: Service The Parksense Park Assist System
STARTING AND OPERATING SERVICE THE PARKSENSE PARK If the "ParkSense Unavailable Service Required" mes- detect an obstacle behind or in front of the fascia/ sage appears in the instrument cluster display, see an bumper, or it could provide a false indication that an ASSIST SYSTEM authorized dealer.
Page 119: Lanesense - If Equipped
STARTING AND OPERATING continues to drift out of the lane, the LaneSense sys- LANESENSE WARNING MESSAGE WARNING! tem provides a visual warning through the instrument The LaneSense system will indicate the current lane cluster display to prompt the driver to remain within the assembly, depending on its size and shape, giving drift condition through the instrument cluster display.
Page 120 STARTING AND OPERATING • When the LaneSense system senses the lane has been approached and is in a lane departure situa- tion, the left lane line flashes yellow (on/off). The LaneSense telltale changes from solid yellow to flashing yellow. At this time torque is applied to the steering wheel in the opposite direction of the lane boundary.
Page 121: Changing Lanesense Status
STARTING AND OPERATING Manual Activation Of The Back Up Camera CHANGING LANESENSE STATUS The following table shows the approximate distances for each zone: 1. Press the Vehicle Menu button located at the bot- The LaneSense system has settings to adjust the inten- tom of the Uconnect display.
Page 122: Refueling The Vehicle
STARTING AND OPERATING CAUTION! CAUTION! • To avoid vehicle damage, ParkView should only be To avoid fuel spillage and overfilling, do not “top off” used as a parking aid. The ParkView camera is the fuel tank after filling. unable to view every obstacle or object in your drive path.
Page 123: Trailer Towing
STARTING AND OPERATING Gross Axle Weight Rating (GAWR) Loading TRAILER TOWING The GAWR is the maximum permissible load on the The actual total weight and the weight of the front and In this section you will find safety tips and information front and rear axles.
Page 124 STARTING AND OPERATING Trailer Frontal Area for heavier Tongue Weights (TW) and may be required WARNING! depending on vehicle and trailer configuration/loading The frontal area is the maximum height multiplied by to comply with Gross Axle Weight Rating (GAWR) If the gross trailer weight is 5,000 lb (2,267 kg) or the maximum width of the front of a trailer.
Page 125: Trailer Hitch Classification
STARTING AND OPERATING 2. Attach the trailer to the vehicle without the weight 5. The vehicle can now be driven. distribution bars connected. Measurement Example Example Height (mm) 3. Measure the height from the top of the front wheel opening on the fender to the ground; this is height 4.
Page 126: Trailer Towing Weights (Maximum Trailer Weight Ratings) - Non-Srt
STARTING AND OPERATING TRAILER TOWING WEIGHTS (MAXIMUM TRAILER WEIGHT RATINGS) — NON-SRT Engine GCWR Maximum GTW Maximum Trailer TW (See Note) 3.6L - RWD Light Duty Cooling 8,900 lb (4,037 kg) 3,500 lb (1,588 kg) 350 lb (159 kg) 3.6L - RWD 11,600 lb (5,262 kg) 6,200 lb (2,812 kg) 620 lb (281 kg)
Page 127: Trailer Hitch Receiver Cover Removal
STARTING AND OPERATING TRAILER HITCH RECEIVER COVER WARNING! REMOVAL — IF EQUIPPED Always load a trailer with 60% of the weight in the Your vehicle may be equipped with a trailer hitch front of the trailer. This places 10% of the GTW on the receiver cover, this must be removed to access the tow hitch of your vehicle.
Page 128 STARTING AND OPERATING Towing Requirements — Trailer Brakes WARNING! CAUTION! Do not interconnect the hydraulic brake system or • • Vehicles with trailers should not be parked on a • Do not tow a trailer at all during the first 500 miles vacuum system of your vehicle with that of the grade.
Page 129 STARTING AND OPERATING Integrated Trailer Brake Module The trailer and the vehicle's brake lamps will come on 2. Hook up the trailer and make the electrical connec- (ITBM) — If Equipped when either vehicle braking or manual trailer brakes tions according to the trailer manufacturer's are applied.
Page 130 STARTING AND OPERATING Towing Requirements — Trailer Lights Display Messages And Wiring The trailer brake control interacts with the instrument cluster display. Display messages, along with a single Whenever pulling a trailer, regardless of the trailer size, chime, will be displayed when a malfunction is deter- stoplights and turn signals on the trailer are required mined in the trailer connection, trailer brake control, or for motoring safety.
Page 131: Towing Tips
STARTING AND OPERATING Automatic Transmission Cruise Control — If Equipped • Select the DRIVE (D) range when towing. The transmis- Do not use on hilly terrain or with heavy loads. sion controls include a drive strategy to avoid frequent • When using the Cruise Control, if you experience shifting when towing.
Page 132: Recreational Towing (Behind Motorhome)
STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME) TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE Wheels OFF The Rear-Wheel Drive All-Wheel Drive Models With Single-Speed All-Wheel Drive Models With Two-Speed Towing Condition Ground Models Transfer Case Transfer Case • See Instructions: • Transmission In PARK NOT ALLOWED NOT ALLOWED...
Page 133: Recreational Towing - All-Wheel Drive Models (Two-Speed Transfer Case)
STARTING AND OPERATING WARNING! CAUTION! CAUTION! the transmission is in PARK. The parking brake • Towing this vehicle in violation of the previously listed DO NOT dolly tow any AWD vehicle. Towing with should always be applied when the driver is not in the requirements can cause severe transmission and/or only one set of wheels on the ground (front or rear) vehicle.
Page 134 STARTING AND OPERATING NOTE: ○ A flashing N (Neutral) position indicator light indi- 10. With the transmission and transfer case in NEU- cates that shift requirements have not been met. TRAL, push and hold the ENGINE START/STOP but- ○ Steps 1 through 5 are requirements that must be ton until the engine turns off.
Page 135: Driving Tips
STARTING AND OPERATING 8. After the N (Neutral) button has been released, the OFF-ROAD DRIVING TIPS drive through water, try to determine the depth and the transfer case will shift to the position indicated by bottom condition (and location of any obstacles) prior to When To Use 4WD Low —...
Page 136 STARTING AND OPERATING Hill Climbing Traction Downhill WARNING! Shift the transmission into a low gear, and the transfer NOTE: Abrasive material in any part of the brakes may cause case into AWD Low. Let the vehicle go slowly down the Before attempting to climb a hill, determine the condi- excessive wear or unpredictable braking.
Page 137: Multimedia
MULTIMEDIA UCONNECT SYSTEMS UCONNECT SETTINGS WARNING! • For detailed information about your Uconnect 4C/4C The Uconnect system uses a combination of buttons on ONLY insert trusted media devices/components NAV With 8.4-inch Display or Uconnect 5 NAV With 10.1- the touchscreen and buttons on the faceplate located into your vehicle.
Page 138: Customer Programmable Features
MULTIMEDIA NOTE: CUSTOMER PROGRAMMABLE When making a selection, press the button on the touchscreen to enter the desired menu. Once in the FEATURES • Only one touchscreen area may be selected at a desired menu, press and release the preferred setting time.
Page 139 MULTIMEDIA Language When the Language button is pressed on the touchscreen, the system displays the different language options. Once an option is selected, the system will display in the chosen language. The available setting is: NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description Language...
Page 140 MULTIMEDIA Setting Name Description Touchscreen Beep This setting will allow you to turn the touchscreen beep on or off. Show Main Category Bar Labels This setting will allow the main category bar labels to be shown on or off. Navigation Next Turn-by-Turn Displayed in This setting will display navigation prompts in the Instrument Cluster Display.
Page 141 This setting will allow you to change the voice options for the radio to “Male” or “Female”. Wake Up Word This setting will change the system’s “Wake Up” word. The available options are “Hey Uconnect” and “Hey Dodge”. Voice Barge-in This setting will allow voice barge-in to be turned on and off.
Page 142 MULTIMEDIA Safety & Driving Assistance After pressing the Safety & Driving Assistance button on the touchscreen, the following settings will be available: NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description Automatic Emergency Braking This setting will take you to the selectable options for “Forward Collision Warning” and “Forward Collision Warning Sensitivity”. This setting will turn the Forward Collision system on or off.
Page 143 MULTIMEDIA Setting Name Description LaneSense Warning — Located In Lane- This setting will change the distance at which the steering wheel will provide lane departure feedback. The available settings are Sense Submenu “Early”, “Medium”, and “Late”. LaneSense Strength — Located In Lane- This setting will change the strength of the steering wheel feedback during a lane departure.
Page 144 MULTIMEDIA Clock/Clock & Date When the Clock/Clock & Date button is pressed on the touchscreen, the system displays the different options related to the vehicle’s internal clock. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description Sync Time With GPS This setting will sync the time to the GPS receiver in the system.
Page 145 Help” setting will show the Command List and provide a brief description of what the command does. The “Never” setting will turn the Command List off. Wake Up Word This setting will change the system’s “Wake Up” word. The available options are “Hey Uconnect” and “Hey Dodge”. Voice Barge-in This setting will turn the Voice Barge-in function on or off.
Page 146 MULTIMEDIA Trailer When the Trailer button is pressed on the touchscreen, the system will display settings related to trailer towing. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description Trailer Select Select from “Trailer 1”, “Trailer 2”, “Trailer 3”, and “Trailer 4”. These trailer designations can be used to save different trailer settings.
Page 147 MULTIMEDIA Mirrors & Wipers When the Mirrors & Wipers button is pressed on the touchscreen, the system displays the options related to the vehicle’s mirrors and wipers. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description Tilt Side Mirrors In Reverse This setting will tilt the outside side-view mirrors when the ignition is in the ON/RUN position and the transmission gear selector is in the REVERSE position.
Page 148 MULTIMEDIA Doors & Locks When the Doors & Locks button is pressed on the touchscreen, the system displays the options related to locking and unlocking the vehicle’s doors. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description Auto Unlock On Exit This setting will unlock the doors when any of the doors are opened from the inside.
Page 149 MULTIMEDIA Seats & Comfort/Auto-On Comfort — If Equipped When Seats & Comfort/Auto-On Comfort button is pressed on the touchscreen, the system displays the options related to the vehicle’s comfort systems when remote start has been activated or the vehicle has been started. NOTE: Depending on the vehicle’s options, feature settings may vary.
Page 150 MULTIMEDIA Audio When the Audio button is pressed on the touchscreen, the system displays options related to the vehicle’s sound system. These settings can change the audio location within the vehicle, adjust the bass or treble levels, and auto-play settings from an audio device or smartphone. NOTE: Depending on the vehicle’s options, feature settings may vary.
Page 151 MULTIMEDIA Notifications When the Notifications button is pressed on the touchscreen, the system displays the options related to Notifications for the system. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description App Drawer Favoriting Pop-Ups This setting turns the “App Favorited” pop-up on or off. App Drawer Unfavoriting Pop-Ups This setting turns the “App Unfavorited”...
Page 152 MULTIMEDIA Accessibility When the Accessibility button is pressed on the touchscreen, the system will display the option related to the vehicle’s theater system. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description The “Accessibility” feature announces a function prior to performing the action selected when using DVD/Blu-ray™ and USB Video Accessibility functions, when it is activated.
Page 153 MULTIMEDIA System Information — If Equipped When the System Information button is pressed on the touchscreen, the system displays the radio system information. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description Version Information When this feature is selected, the radio version build will be displayed. License Information When this feature is selected, a software license screen will appear, displaying the system software version.
Page 154: Uconnect Introduction
MULTIMEDIA UCONNECT INTRODUCTION SYSTEM OVERVIEW NOTE: Uconnect screen images are for illustration purposes only and may not reflect exact software for your vehicle. Feature Description Radio/Media Press/Push the Radio button or Media button to enter Radio Mode/Media Mode and access the radio functions and external audio sources page 154.
Page 155: Safety And General Information
MULTIMEDIA Feature Description Rotate the rotary knob to adjust the volume. Push the VOLUME & On/Off button on the faceplate to turn the system on or off. NOTE: Push and hold the VOLUME & On/Off button for approximately 10 seconds to reset the radio manually.
Page 156: Uconnect Modes
MULTIMEDIA Volume & On/Off Control The following describes the left-hand control operation UCONNECT MODES in each mode: Push the VOLUME & On/Off control knob to turn on and off the Uconnect system. Radio Operation STEERING WHEEL AUDIO The electronic volume control turns continuously Pushing the top of the switch will seek up for the next (360 degrees) in either direction, without stopping.
Page 157 MULTIMEDIA Fast Seek Up and Fast Seek Down Push the VR button on the steering wheel and wait and Puerto Rico (with coverage limitations). SiriusXM® for the beep to say a command. See an example: Internet radio service is available throughout their satel- Press and hold, and then release the Seek Up “...
Page 158 MULTIMEDIA • The SiriusXM® Presets are displayed at the top of In addition to the tuning operation functions common to Press the Replay button on the touchscreen. The Play/ the screen. all radio modes, the Replay, Traffic/Weather button, Pause, Rewind/Forward and Live buttons will display at and Favorite button functions are available in the top of the screen, along with the replay time.
Page 159 MULTIMEDIA FAVORITES Alert Settings Press the Alert Settings tab at the top of the Favorites Press the All button on the Browse Screen. When press- Press the Favorites button on the touchscreen to acti- screen. The Alert Settings menu allows you to choose ing the All button, the following categories become vate the favorites menu, which will time out within from a visual alert or audible and visual alert when one...
Page 160: Media Mode
MULTIMEDIA Tune Start • Controlling The Auxiliary Device Albums • Genres Auxiliary Mode (AUX) is entered by inserting an AUX Tune Start begins playing the current song from the device using a cable with a 3.5 mm audio jack into the •...
Page 161: Phone Mode
MULTIMEDIA Tracks sub-functions, which can be scrolled through by press- PHONE MODE ing the Up and Down buttons to the right. The TUNE/ In USB Mode, press the Tracks button on the touch- Overview SCROLL knob can also be used to scroll. screen to display a pop-up with the Song List.
Page 162 MULTIMEDIA NOTE: Phone Button • For certain operations, compound commands can be used. For example, instead of saying “Call” and Your phone must be capable of SMS messaging via The Phone button on your steering wheel is then “John Smith” and then “mobile”, the following Bluetooth®...
Page 163 MULTIMEDIA NOTE: question to which the user can respond without push- 5. If “No” is selected, and you still would like to pair a ing the Voice Command button on the steering wheel. mobile phone, press the Phone Pairing or Settings •...
Page 164 MULTIMEDIA NOTE: DISCONNECTING OR DELETING A PHONE OR PHONEBOOK DOWNLOAD (AUTOMATIC AUDIO DEVICE PHONEBOOK TRANSFER FROM MOBILE During the pairing procedure, you may receive a pop-up on your mobile phone for the Uconnect system to PHONE) — IF EQUIPPED 1. Press the Uconnect Phone Pairing or Settings access your “messages”...
Page 165 MULTIMEDIA Phone Call Features RECENT CALLS — IF EQUIPPED • This downloaded phonebook cannot be edited or deleted on the Uconnect Phone. These can only be The following features can be accessed through the You may browse a list of the most recent of each of the edited on the mobile phone.
Page 166 MULTIMEDIA DO NOT DISTURB MAKING A SECOND CALL WHILE CURRENT NOTE: CALL IS IN PROGRESS The call will remain within the vehicle audio system With Do Not Disturb, you can disable notifications from until the phone becomes out of range for the incoming calls and texts, allowing you to keep your eyes You can place a call on hold by pressing the Hold button Bluetooth®...
Page 167 MULTIMEDIA Echo at the far end can sometimes be reduced by low- PRE-DEFINED VOICE TEXT REPLY RESPONSES WARNING! ering the in-vehicle audio volume. Yes. Stuck in traffic. See you later. Phone Voice Commands ALWAYS drive safely with your hands on the wheel. Start without You have full responsibility and assume all risks I’ll be late.
Page 168: Connected Vehicle Services - If Equipped
MULTIMEDIA What Is Brand Connect? firm your requests. The system is designed to keep your For further information about the ASSIST and SOS but- eyes on the road and your hands on the wheel by letting tons page 237. Brand Connect uses an embedded device in the Siri help you perform useful tasks.
Page 169: Getting Started With Connected Vehicle Services
MULTIMEDIA 3. For customers in the United States, select “Cus- • Brand Connect provides: Download the Vehicle Branded App to your mobile tomer Care” to speak with a Brand Connect Cus- device. • The ability to remotely lock/unlock and remote start tomer Care agent who will activate services in your •...
Page 170: Using Brand Connect
MULTIMEDIA • Edit/Edit Profile: Once on the Remote screen and you have set up USING BRAND CONNECT your four-digit PIN, you can begin using Remote Door To manage the details of your Brand Connect SOS Call — If Equipped Lock/Unlock, Remote Vehicle Start, and activate account, such as your contact information, pass- your horn and lights remotely, if equipped.
Page 171 MULTIMEDIA NOTE: SOS Call System Limitations If your vehicle loses battery power for any reason (including during or after an accident), the SOS Call Certain Brand Connect connected services are depen- Vehicles that have been purchased in the US and that system, among other vehicle systems, will not operate.
Page 172 MULTIMEDIA Automatic SOS — If Equipped • Brand Connect connected services are dependent WARNING! upon an operative telematics device, a cellular con- Automatic SOS is a hands-free safety service that can nection, navigation map data, and GPS satellite (INCLUDING DURING OR AFTER AN ACCIDENT), immediately connect you with help in the event that reception, which can limit the ability to reach the NEITHER THE VEHICLE BRANDED APPS NOR THE...
Page 173 MULTIMEDIA • • Contacting Brand Connect Customer Care (not avail- 5. A message will appear on the screen to let you know Vehicle must have an operable LTE (voice/data) or able on all functions) if the command was received by your vehicle. 4G (data) network connection.
Page 174 MULTIMEDIA Remote Horn & Lights • Connected Services — Contact the Brand Connect You can set up push notifications every time a com- mand is sent to activate or cancel Remote Start. Customer Care call center to activate your services, Description renew after your trial has expired, for in-vehicle sup- Working Vehicle Conditions...
Page 175 MULTIMEDIA Disclaimers • From this screen, you will be able to: Vehicle must have an active subscription that ○ includes the applicable feature. If Roadside Assistance Call is provided to your vehicle, View the location on a map. • you agree to be responsible for any additional roadside ○...
Page 176 MULTIMEDIA other portable-enabled media device) to wirelessly con- 4. Brand Connect Customer Care will work with your WARNING! nect to the internet. Uconnect offers a complimentary local law enforcement to locate the vehicle. You will 3-month trial period that includes 1GB of total data. be contacted by law enforcement if your vehicle is Always drive safely with your hands on the steering The trial can be activated any time within the first year...
Page 177 MULTIMEDIA NOTE: In order to provide the Monthly Vehicle Health Report, Here are a few of the many questions you can ask the Uconnect system in your vehicle may collect and Alexa: Vehicle Health Alert emails require you to register and transmit vehicle data to Brand Connect and to FCA, •...
Page 178: Manage My Brand Connect Account
MULTIMEDIA Family Drive Alerts — If Equipped 3. Make sure your watch and smartphone are con- CONNECTED SERVICES SOS nected through Bluetooth®. Description FAQS — IF EQUIPPED 4. The Vehicle Branded App should appear on your Family Drive Alerts help promote safer driving and give 1.
Page 179: Connected Services Roadside Assistance Faqs
MULTIMEDIA 3. How do I turn off the horn and lights after I turn required for the activation of Remote services CONNECTED SERVICES SEND & GO them on? If you are close enough to the vehicle, you through your mobile device. It is your responsibility FAQS —...
Page 180: Connected Services Remote Vehicle Start Faqs
MULTIMEDIA NOTE: 5. Can I stop a vehicle that is being driven with the CONNECTED SERVICES ACCOUNT cancel Remote Vehicle Start command? No. If the FCA is not an insurance company, and Brand Con- FAQS — IF EQUIPPED vehicle is in motion, the cancel Remote Vehicle Start nect is not an insurance product.
Page 181: Data Collection & Privacy
MULTIMEDIA 15. Can I cancel a subscription before it expires? Yes. your account via Brand Connect Call or performing date thereafter, unless you cancel your subscription any remote services, such as Remote Door Lock/ by calling Brand Connect Care. If you have not If you have an annual subscription, your subscrip- Unlock, Remote Horn &...
Page 182: Performance Pages
MULTIMEDIA vacy Policy, which can be found at On vehicles equipped with SRT, to access the Perfor- The following describes each feature and its operation: www.driveuconnect.com/connectedservices/privacy.html mance Pages, press the Vehicle button on the touch- TIMERS (US Residents) or www.driveuconnect.ca (Canadian screen.
Page 183: Gauges
MULTIMEDIA Drag • • With a USB drive installed, press the USB button to ¼ Mile + speed (400 m + speed) mph save to the jump drive. • Brake Distance ft (meters) • Press the Cancel button to return to the Timers NOTE: page.
Page 184: Dynamometer (Dyno)/Engine
MULTIMEDIA When selected, this screen displays the following val- ues: • Oil Temperature Shows the actual oil temperature. • Oil Pressure Shows the actual oil pressure. • Coolant Temperature Shows the actual coolant temperature. • Battery Voltage Shows actual battery voltage. •...
Page 185: G-Force
MULTIMEDIA Engine Torque • • Front G-Force Shows the instantaneous torque. Measures the peak braking force on the front of the Oil Pressure (6.4L Only) — If Equipped • vehicle. • Right G-Force Shows the actual engine oil pressure. Boost Pressure (6.2 Only) — If Equipped •...
Page 186: Vehicle Dynamics
MULTIMEDIA • VEHICLE DYNAMICS Pushing the SRT button located on the instrument panel switchbank. The Vehicle Dynamics page displays information con- The SRT Drive Modes main screen displays the current cerning the vehicle’s drivetrain. drive mode and real-time status of the vehicle’s perfor- mance configuration.
Page 187: Tow Mode
MULTIMEDIA Selecting “Track” on the touchscreen will activate the TOW MODE SNOW MODE configuration for typical track driving. The Transmission, Stability Control, All-Wheel Drive, Steering, and Suspen- sion systems are all set to their Track settings. The Paddle Shifters are enabled. NOTE: While in Track Mode, Electronic Stability Control (ESC) Full-Off can be activated by pushing and holding the...
Page 188: Auto Mode
MULTIMEDIA Custom Mode may be selected by pushing the Custom button on the touchscreen. Custom Mode allows you to create a custom configuration that is saved for quick selection of your favorite settings. While in Custom Mode, the All-Wheel Drive, Stability Control, Transmis- sion, Steering, and Suspension settings are shown in their current configuration.
Page 189 MULTIMEDIA Transmission Paddle Shifters All-Wheel Drive 8-Speed Transmission Paddle Shifters All-Wheel Drive • • • Track Track Press the Track button on the touchscreen to pro- Press the On button on the touchscreen to enable Press the Track button on the touchscreen to pro- vide the fastest shift speeds with the highest com- steering wheel Paddle Shifters.
Page 190: Race Options
MULTIMEDIA Stability Control Suspension Steering Stability Control Suspension Steering • • • Track Track Track Press the Track button on the touchscreen to pro- Press the Track button on the touchscreen to pro- Press the Track button on the touchscreen to adjust vide minimal stability control.
Page 191: Launch Control
MULTIMEDIA ○ • LAUNCH CONTROL Launch Control is intended to be used on dry, paved While holding the brake, rapidly apply and hold road surfaces only. the accelerator pedal to wide open throttle. The engine speed will hold at the RPM that was set Launch Control is only available when the following pro- WARNING! in the Launch Control screen.
Page 192: Shift Light
MULTIMEDIA CAUTION! Do not attempt to shift when the drive wheels are spinning and do not have traction. Damage to the transmission may occur. Shift Light Button Shift Light RPM Set-Up To actuate the Shift Light feature, press the Shift Light The Shift Light RPM Set-Up allows you to set the Shift button on the touchscreen while in the Race Options Light to illuminate for gears 1, 2, 3, 4, and 5-6.
Page 193: Eco Mode
MULTIMEDIA NOTE: • Prior to each track event, verify the front and rear 6. Occasionally, a second burnish session is required. brake pads have more than half pad thickness If the brake pads begin to emit an odor during the It is recommended that you target below 42 psi remaining.
Page 194: Radio Operation And Mobile Phones
MULTIMEDIA • ECO will be disabled when another Drive Mode is The radio manufacturer believes the internal wireless selected or the ECO button is pushed. radio is safe for use by consumers. The level of energy emitted is far less than the electromagnetic energy •...
Page 195: Safety
SAFETY Anti-Lock Brake System (ABS) Warning SAFETY FEATURES WARNING! Light • The ABS contains sophisticated electronic equip- ANTI-LOCK BRAKE SYSTEM (ABS) The yellow ABS Warning Light will turn on when the igni- ment that may be susceptible to interference tion is placed in the ON/RUN mode and may stay on for caused by improperly installed or high output radio The ABS provides increased vehicle stability and brake as long as four seconds.
Page 196: Electronic Brake Control (Ebc) System
SAFETY Brake Assist System (BAS) required. If the Brake System Warning Light does not WARNING! come on when the ignition is placed in the ON/RUN The BAS is designed to optimize the vehicle’s braking mode, have the light repaired as soon as possible. •...
Page 197 SAFETY Electronic Roll Mitigation (ERM) • Understeer — when the vehicle is turning less than WARNING! appropriate for the steering wheel position. ERM anticipates the potential for wheel lift by monitor- the performance of the ESC system. Changes to ESC uses sensors in the vehicle to determine the ing the driver’s steering wheel input and the speed of vehicle path intended by the driver and compares it to the steering system, suspension, braking system,...
Page 198 SAFETY NOTE: “Full Off” can only be achieved in Track Mode vehicle has been driven several miles (kilometers) at (if equipped). speeds greater than 30 mph (48 km/h), see an autho- For vehicles with multiple partial ESC modes, the push rized dealer as soon as possible to have the problem and release of the button may toggle the ESC modes.
Page 199 SAFETY Rain Brake Support (RBS) the brake pressure for a short period. If the driver does WARNING! not apply the throttle before this time expires, the sys- RBS may improve braking performance in wet condi- tem will release brake pressure and the vehicle will roll safe control of your vehicle.
Page 200: Auxiliary Driving Systems
SAFETY • not stop all trailers from swaying. Always use caution BSM may experience dropouts (blinking on and off) when towing a trailer and follow the trailer tongue of the side mirror warning indicator lights when a weight recommendations page 121. motorcycle or any small object remains at the side of the vehicle for extended periods of time (more When TSC is functioning, the ESC Activation/...
Page 201 SAFETY If the system detects degraded performance due to The BSM system monitors the detection zone from contamination or foreign objects, a message will warn three different entry points (Side, Rear, Front) while you of a blocked sensor and the warning indicators in driving to see if an alert is necessary.
Page 202 SAFETY For information on how Blind Spot Monitoring functions RCP monitors the rear detection zones on both sides of when pulling a trailer page 201. the vehicle, for objects that are moving toward the side of the vehicle with a minimum speed of approximately 5 mph (8 km/h), to objects moving a maximum of WARNING! approximately 20 mph (32 km/h), such as in parking lot...
Page 203 SAFETY Trailer Merge Assist — If Equipped the system is operating in Rear Cross Path (RCP) mode, matically determine the presence and length of a the system will respond with both visual and audible trailer. The presence of a trailer will be detected Trailer Merge Assist is a function of the Blind Spot Moni- alerts when a detected object is present.
Page 204: Forward Collision Warning (Fcw) With Mitigation
SAFETY • • The maximum width supported by the Trailer Merge Trailer length between 10 ft to 20 ft (3 m to 6 m) — Crowded areas such as parking lots, neighborhoods, Assist feature is 8.5 ft (2.59 m). Trailer width is mea- Blind spot zone will be adjusted to 20 ft (6 m) etc.
Page 205 SAFETY FCW Braking Status And Sensitivity NOTE: When the system determines a collision with the vehicle in front of you is no longer probable, the FCW monitors the information from the forward looking The FCW Sensitivity and Active Braking status are pro- warning message will be deactivated.
Page 206: Tire Pressure Monitoring System (Tpms)
SAFETY Service FCW Warning NOTE: (1.6 km) after a three-hour period. The tire pressure will also increase as the vehicle is driven — this is normal • If the system turns off, and the instrument cluster dis- Changing the FCW status to “Only Warning” pre- and there should be no adjustment for this increased plays: vents the system from providing limited active brak-...
Page 207 SAFETY NOTE: • may cause the tire pressure to rise to approximately The TPMS should not be used as a tire pressure 28 psi (193 kPa), but the TPMS Warning Light will still gauge while adjusting your tire pressure. It is particularly important for you to regularly check the be on.
Page 208 SAFETY Service TPMS Warning NOTE: There is no TPMS sensor in the spare tire. The TPMS The TPMS Warning Light will flash on and off for 75 will not be able to monitor the tire pressure. If you seconds, and remain on solid when a system fault is install the spare tire in place of a road tire that has a detected.
Page 209: Occupant Restraint Systems
SAFETY TPMS Deactivation — If Equipped OCCUPANT RESTRAINT SYSTEMS 4. Never allow children to slide the shoulder belt behind them or under their arm. The TPMS can be deactivated if replacing all four wheel Some of the most important safety features in your 5.
Page 210: Seat Belt Systems
SAFETY NOTE: BeltAlert Warning Sequence SEAT BELT SYSTEMS If BeltAlert has been deactivated and the driver or out- The BeltAlert warning sequence is activated when the Buckle up even though you are an excellent driver, even board front seat passenger (if equipped with outboard vehicle is moving above a specified vehicle speed range on short trips.
Page 211 SAFETY WARNING! WARNING! WARNING! • • Do not allow people to ride in any area of your A twisted seat belt may not protect you properly. In involved in a collision, or if you have questions vehicle that is not equipped with seats and seat a collision, it could even cut into you.
Page 212 SAFETY 5. Position the shoulder belt across the shoulder and chest with minimal, if any slack so that it is comfort- able and not resting on your neck. The retractor will withdraw any slack in the shoulder belt. 6. To release the seat belt, push the red button on the buckle.
Page 213 SAFETY Seat Belt Pretensioner WARNING! WARNING! The front outboard seat belt system is equipped with • Using a Seat Belt Extender when not needed can • Wearing your seat belt incorrectly could make your pretensioning devices that are designed to remove increase the risk of serious injury or death in a injuries in a collision much worse.
Page 214 SAFETY WARNING! • Never place a rear-facing child restraint in front of an air bag. A deploying passenger front air bag can cause death or serious injury to a child 12 years or younger, including a child in a rear-facing child restraint.
Page 215: Supplemental Restraint Systems (Srs)
SAFETY • • Supplemental Knee Air Bags The Air Bag Warning Light does not come on during WARNING! the four to eight seconds when the ignition switch is • Front and Side Impact Sensors • first in the ON/RUN position. Failure to replace the seat belt assembly could •...
Page 216 SAFETY been detected. If the Redundant Air Bag Warning Light This vehicle may be equipped with a driver and/or front WARNING! comes on intermittently or remains on while driving passenger seat belt buckle switch that detects whether have an authorized dealer service the vehicle immedi- the driver or front passenger seat belt is buckled.
Page 217 SAFETY Front Air Bag Operation The steering wheel hub trim cover and the upper pas- located beneath the passenger seat cushion foam. Any senger side of the instrument panel separate and fold weight on the seat will be sensed by the Sensor. The Front Air Bags are designed to provide additional pro- out of the way as the air bags inflate to their full size.
Page 218 SAFETY • * It is possible for a child to be classified as an adult, Sitting in the center of the seat with their feet com- senger seat may result in a reduced-power deployment allowing a full-power Passenger Advanced Front Air Bag fortably on or near the floor of the Passenger Advanced Front Air Bag.
Page 219 SAFETY WARNING! • Always wear your seat belt and sit properly, with the seatback in an upright position, your back against the seatback, sitting upright, facing for- ward, in the center of the seat, with your feet com- fortably on or near the floor. •...
Page 220 SAFETY Knee Impact Bolsters trim cover, or cushion needs service for any reason, take the vehicle to an authorized dealer. Only FCA US The Knee Impact Bolsters help protect the knees of the LLC approved seat accessories may be used. driver and front passenger, and position the front occu- The following requirements must be strictly followed: pants for improved interaction with the front air bags.
Page 221 SAFETY Supplemental Side Air Bag Inflatable Curtains (SABICs) The Side Air Bags will not deploy in all side collisions, WARNING! are located above the side windows. The trim covering including some collisions at certain angles, or some the SABICs is labeled “SRS AIRBAG” or “AIRBAG.” side collisions that do not impact the area of the pas- •...
Page 222 SAFETY Air Bag System Components lar to friction rope burns or those you might get slid- WARNING! ing along a carpet or gymnasium floor. They are not NOTE: • caused by contact with chemicals. They are not per- Being too close to the Side Air Bags during deploy- manent and normally heal quickly.
Page 223 SAFETY Enhanced Accident Response System NOTE: WARNING! After an accident, remember to place the ignition in the In the event of an impact, if the communication net- STOP (OFF/LOCK) position to avoid draining the battery. senger side of the instrument panel. Do not modify work remains intact, and the power remains intact, Carefully check the vehicle for fuel leaks in the engine the front fascia/bumper, vehicle body structure, or...
Page 224: Child Restraints
SAFETY • How far (if at all) the driver was depressing the CHILD RESTRAINTS There are different sizes and types of restraints for chil- accelerator and/or brake pedal; and, dren from newborn size to the child almost large Everyone in your vehicle needs to be buckled up at all enough for an adult safety belt.
Page 225 SAFETY Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Children 12 years old or younger, who have outgrown the Children Too Large for Child Restraints Vehicle Seat Belt, seated in a rear seat of the vehicle height or weight limit of their booster seat Infant And Child Restraints WARNING! WARNING!
Page 226 SAFETY 2. Do the child’s knees bend comfortably over the front tacts the face or neck, move the child closer to the cen- of the vehicle seat while the child is still sitting all ter of the vehicle, or use a booster seat to position the the way back? seat belt on the child correctly.
Page 227 SAFETY Lower Anchors And Tethers For CHildren LATCH Positions For Installing Child (LATCH) Restraint System Restraints In This Vehicle 60/40 Second Row LATCH Positions (7 Passenger) Lower Anchorage Symbol (2 Anchorages Per Seat- LATCH Label ing Position) Top Tether Anchorage Symbol Your vehicle is equipped with the child restraint anchor- 60/40 Second Row LATCH Positions (5 Passenger) age system called LATCH, which stands for Lower...
Page 228 SAFETY Frequently Asked Questions About Installing Child Restraints With LATCH Use the LATCH anchorage system until the combined What is the weight limit (child’s weight + weight of the weight of the child and the child restraint is 65 lb (29.5 child restraint) for using the LATCH anchorage system to 65 lb (29.5 kg) kg).
Page 229 SAFETY Locating The LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the gap between the seatback and seat cushion.
Page 230 SAFETY Center Seat LATCH — Five Or Seven Passenger Vehicles Second Row Seating Only WARNING! • Do not install a child restraint in the center posi- tion using the LATCH system. This position is not approved for installing child seats using the LATCH attachments.
Page 231 SAFETY To Install A LATCH-Compatible Child How To Stow An Unused Switchable-ALR Restraint (ALR) Seat Belt: If the selected seating position has a Switchable Auto- When using the LATCH attaching system to install a matic Locking Retractor (ALR) seat belt, stow the seat child restraint, stow all ALR seat belts that are not being belt, following the instructions below.
Page 232 SAFETY Lap/Shoulder Belt Systems For WARNING! Installing Child Restraints In This Vehicle • Improper installation or failure to properly secure a child restraint can lead to failure of the restraint. The child could be badly injured or killed. • Follow the child restraint manufacturer’s directions exactly when installing an infant or child restraint.
Page 233 SAFETY Frequently Asked Questions About Installing Child Restraints With Seat Belts What is the weight limit (child’s weight + weight of the Always use the tether anchor when using the seat belt to child restraint) for using the Tether Anchor with the seat Weight limit of the Child Restraint install a forward-facing child restraint, up to the recom- belt to attach a forward-facing child restraint?
Page 234 SAFETY restraint and between the two posts. If not possible, WARNING! lower the head restraint and pass the tether strap around the outboard side of the head restraint. page 225 for the location of approved tether anchorages in your vehicle. 4.
Page 235: Safety Tips
SAFETY SAFETY TIPS TRANSPORTING PASSENGERS NEVER TRANSPORT PASSENGERS IN THE CARGO AREA. WARNING! • Do not leave children or animals inside parked vehicles in hot weather. Interior heat buildup may cause serious injury or death. • It is extremely dangerous to ride in a cargo area, Second Row Bench Seat Top Tether Strap Mounting Captain’s Chair Top Tether Strap Mounting inside or outside of a vehicle.
Page 236: Connected Vehicles
SAFETY Air Bag Warning Light CONNECTED VEHICLES WARNING! The Air Bag Warning Light will turn on for Privacy of any wireless and wired communications can- An improperly attached, damaged, folded, or stacked four to eight seconds as a bulb check when not be assured.
Page 237: Periodic Safety Checks You Should Make Outside The Vehicle
SAFETY cracks, and bulges. Check the lug nut/bolt torque for WARNING! WARNING! tightness. Check the tires (including spare) for proper • cold inflation pressure. ALWAYS make sure objects cannot fall or slide into To prevent SERIOUS INJURY or DEATH: the driver’s side floor area when the vehicle is •...
Page 238: Carbon Monoxide Warnings
SAFETY The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged, have an authorized dealer inspect the complete exhaust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned...
Page 239: In Case Of Emergency
IN CASE OF EMERGENCY NOTE: HAZARD WARNING FLASHERS WARNING! With extended use, the Hazard Warning Flashers may discharge the battery. The Hazard Warning Flashers button is located on the ALWAYS obey traffic laws and pay attention to the switch bank just below the climate controls. road.
Page 240 IN CASE OF EMERGENCY SOS Call System Limitations the Rearview Mirror or press the cancellation button WARNING! on the Device Screen. Termination of the SOS Call Vehicles sold in Mexico DO NOT have SOS Call system will turn off the green LED light on the Rearview •...
Page 241: Jacking And Tire Changing - If Equipped
IN CASE OF EMERGENCY NOTE: Even if the SOS Call system is fully functional, factors CAUTION! beyond FCA US LLC’s control may prevent or stop the • Never place anything on or near the vehicle’s LTE SOS Call system operation. These include, but are not (voice/data), 4G (data) and GPS antennas.
Page 242: Preparations For Jacking
IN CASE OF EMERGENCY JACK LOCATION — IF EQUIPPED WARNING! The scissor-type jack and tire changing tools are • The jack is designed to be used as a tool for located in rear cargo area, below the load floor. changing tires only. The jack should not be used to lift the vehicle for service purposes.
Page 243: Spare Tire Stowage - If Equipped
IN CASE OF EMERGENCY SPARE TIRE STOWAGE — SPARE TIRE REMOVAL — IF EQUIPPED IF EQUIPPED The spare tire is stowed under the rear of the vehicle by Remove the spare tire before attempting to jack up the means of a cable winch mechanism. To remove or stow vehicle.
Page 244: Jacking Instructions - If Equipped
IN CASE OF EMERGENCY Winch Location Spare Tire Sleeve And Cable NOTE: JACKING INSTRUCTIONS — The vehicle may come equipped with a metal IF EQUIPPED retainer only when removing the spare page 293. WARNING! 5. Pull the metal stamping toward you. Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: •...
Page 245 IN CASE OF EMERGENCY 1. Loosen (but do not remove) the wheel lug nuts by 3. For the front tire, place the jack on the body flange WARNING! just behind the front tire. Do not raise the vehicle turning them to the left, one turn, while the wheel is until you are sure the jack is fully engaged.
Page 246 IN CASE OF EMERGENCY WARNING! CAUTION! Raising the vehicle higher than necessary can make Be sure to mount the spare tire with the valve stem the vehicle less stable. It could slip off the jack and facing outward. The vehicle could be damaged if the hurt someone near it.
Page 247: Jump Starting
IN CASE OF EMERGENCY NOTE: to the jack with the lug wrench on the forward side of the jack. Expand the jack on the bracket by turn- Double check to ensure the tire is snug against the ing the thumb screw clockwise until it is tight to underbody of the vehicle.
Page 248: Preparations For Jump Start
IN CASE OF EMERGENCY NOTE: WARNING! CAUTION! Be sure that the disconnected cable ends do not touch • each other, or either vehicle, before properly connected Remove any metal jewelry such as rings, watch Do not use a portable battery booster pack or any for jump starting.
Page 249: Refueling In Emergency - If Equipped
IN CASE OF EMERGENCY 2. Connect the opposite end of the positive (+) jumper Disconnecting The Jumper Cables REFUELING IN EMERGENCY – cable to the positive (+) post of the booster battery. 1. Disconnect the negative (-) end of the jumper cable IF EQUIPPED 3.
Page 250: If Your Engine Overheats
IN CASE OF EMERGENCY • White smoke coming from engine or exhaust • Coolant bottle coolant has bubbles present WARNING! You or others can be badly burned by hot engine cool- ant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool.
Page 251: Manual Park Release
IN CASE OF EMERGENCY 5. While the metal latch is in the open position, pull CAUTION! upward on the tether strap until the lever clicks and latches in the released position. The transmission is Driving with a hot cooling system could damage your now out of PARK (P) and the vehicle can be moved.
Page 252: Freeing A Stuck Vehicle
IN CASE OF EMERGENCY FREEING A STUCK VEHICLE WARNING! If your vehicle becomes stuck in mud, sand or snow, it Fast spinning tires can be dangerous. Forces gener- can often be moved using a rocking motion. Turn the ated by excessive wheel speeds may cause damage, steering wheel right and left to clear the area around or even failure, of the axle and tires.
Page 253: Towing A Disabled Vehicle
IN CASE OF EMERGENCY TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial towing service. If the transmission and drivetrain are operable, disabled 4x4 vehicles may also be towed as described under page 130. Towing Condition Wheels OFF The Ground Rear-Wheel Drive Models...
Page 254: All-Wheel Drive Models
IN CASE OF EMERGENCY ENHANCED ACCIDENT RESPONSE SYSTEM CAUTION! CAUTION! (EARS) • • Towing faster than 30 mph (48 km/h) or farther Front or rear wheel lifts must not be used (if the than 30 miles (48 km) with rear wheels on the remaining wheels are on the ground).
Page 255: Servicing And Maintenance
SERVICING AND MAINTENANCE Once A Month Or Before A Long Trip: SCHEDULED SERVICING influence when the “Oil Change Required” message is displayed. Have your vehicle serviced as soon as pos- • Check engine oil level sible, within the next 500 miles (805 km). Your vehicle is equipped with an automatic oil change •...
Page 256 SERVICING AND MAINTENANCE Mileage Or Time Passed (Whichever Comes First) Or Years: Or Kilometers: Additional Inspections Inspect the CV/Universal joints. Inspect front suspension, tie rod ends, and replace if necessary. Inspect the front and rear axle fluid, change if using your vehicle for police, taxi, fleet, off- road or frequent trailer towing.
Page 257: Scheduled Servicing - Srt
SERVICING AND MAINTENANCE Mileage Or Time Passed (Whichever Comes First) Or Years: Or Kilometers: Inspect accessory drive belt tensioner and pul- ley, replace if necessary. Change transfer case fluid - Normal Usage. Change transfer case fluid - Severe Usage (police, taxi, fleet, off-road or frequent trailer towing).
Page 258: Maintenance Plan - Srt
SERVICING AND MAINTENANCE Once A Month • An authorized dealer will reset the oil change indicator Inspect the brake hoses and lines. message after completing the scheduled oil change. If • • Check tire pressure and look for unusual wear or Inspect the CV/Universal joints.
Page 259 SERVICING AND MAINTENANCE Miles: Or Months: 96 102 108 114 120 126 132 138 144 150 Or Kilometers: Inspect the brake linings; replace if necessary. Inspect the CV/Universal joints. Inspect the exhaust system. Adjust the parking brake on vehicles equipped with four wheel disc brakes. Drain the transfer case and refill.
Page 260 SERVICING AND MAINTENANCE Miles: Or Months: 96 102 108 114 120 126 132 138 144 150 Or Kilometers: Replace the spark plugs – 6.2L Super- charged Engine. ** Replace the spark plugs – 6.4L Engine. ** Flush and replace the engine coolant at 120 months if not done at 150,000 miles (240,000 km).
Page 261: Engine Compartment
SERVICING AND MAINTENANCE ENGINE COMPARTMENT 3.6L ENGINE 1 — Remote Jump Start Negative Terminal 6 — Brake Fluid Reservoir Cap 2 — Remote Jump Start Positive Terminal 7 — Engine Coolant Pressure Cap 3 — Power Distribution Center (Fuses) 8 — Washer Fluid Reservoir Cap 4 —...
Page 262: L Engine
SERVICING AND MAINTENANCE 5.7L ENGINE 1 — Remote Jump Start Negative Terminal 6 — Engine Coolant Reservoir Cap 2 — Remote Jump Start Positive Terminal 7 — Engine Coolant Pressure Cap 3 — Power Distribution Center (Fuses) 8 — Engine Oil Dipstick 4 —...
Page 263: 6.2L Supercharged Engine
SERVICING AND MAINTENANCE 6.2L SUPERCHARGED ENGINE 1 — Remote Jump Start Positive Terminal 7 — Engine Coolant Reservoir Cap 2 — Power Distribution Center (Fuses) 8 — Engine Coolant Pressure Cap 3 — Intercooler Coolant Reservoir Cap 9 — Engine Oil Dipstick 4 —...
Page 264: 6.4L Engine
SERVICING AND MAINTENANCE 6.4L ENGINE 1 — Remote Jump Start Negative Terminal 6 — Engine Coolant Reservoir Cap 2 — Remote Jump Start Positive Terminal 7 — Engine Coolant Pressure Cap 3 — Power Distribution Center (Fuses) 8 — Engine Oil Dipstick 4 —...
Page 265: Checking Oil Level
SERVICING AND MAINTENANCE CHECKING OIL LEVEL ADDING WASHER FLUID WARNING! To ensure proper engine lubrication, the engine oil must The instrument cluster display will indicate when the • Battery fluid is a corrosive acid solution and can be maintained at the correct level. Check the oil level at washer fluid level is low.
Page 266: Pressure Washing
SERVICING AND MAINTENANCE American Petroleum Institute (API) PRESSURE WASHING ENGINE OIL Approved Engine Oil Cleaning the engine compartment with a high pressure Engine Oil Selection — Non-SRT washer is not recommended. These symbols mean that the oil has been certified by Use only the manufacturer's recommended fluid the API.
Page 267: Engine Oil Filter
SERVICING AND MAINTENANCE Disposing Of Used Engine Oil And Oil 3. Remove the engine air cleaner filter from the hous- WARNING! Filters ing assembly. the vehicle with the air induction system (air cleaner, Care should be taken in disposing of used engine oil hoses, etc.) removed.
Page 268: Air Conditioner Maintenance
SERVICING AND MAINTENANCE Engine Air Cleaner Filter Inspection and 1. Install the engine air cleaner filter into the housing WARNING! Replacement — SRT assembly with the engine air cleaner filter inspec- tion surface facing downward. • The air conditioning system contains refrigerant Engine Air Cleaner Filter Removal under high pressure.
Page 269 SERVICING AND MAINTENANCE Refrigerant Recovery And Recycling R-1234yf — If Equipped R-1234yf Air Conditioning Refrigerant is a Hydrofluo- roolefin (HFO) that is endorsed by the Environmental Protection Agency and is an ozone-friendly substance with a low global-warming potential. The manufacturer recommends that air conditioning service be performed by an authorized dealer using recovery and recycling equipment.
Page 270: Accessory Drive Belt Inspection
SERVICING AND MAINTENANCE 8. Reinstall the glove compartment door on the door along a rib must be replaced. Also have the belt hinge and reattach the tension tether by inserting replaced if it has excessive wear, frayed cords or severe the tether clip in the glove compartment and sliding glazing.
Page 271: Body Lubrication
SERVICING AND MAINTENANCE NOTE: BODY LUBRICATION Life expectancy of wiper blades varies depending on Locks and all body pivot points, including such items as geographical area and frequency of use. If chattering, seat tracks, door hinge pivot points and rollers, liftgate, marks, water lines or wet spots are present, clean the tailgate, decklid, sliding doors and hood hinges, should wiper blades or replace as necessary.
Page 272 SERVICING AND MAINTENANCE 5. Gently lower the wiper blade onto the glass. Rear Wiper Blade Removal/Installation 1. Lift the rear wiper arm pivot cap away from the glass to allow the rear wiper blade to be raised off of the glass.
Page 273: Exhaust System
SERVICING AND MAINTENANCE 3. Insert the wiper blade pivot pin into the opening on the end of the wiper arm. Grab the bottom end of the wiper arm with one hand, and press the wiper blade flush with the wiper arm until it snaps into place.
Page 274: Cooling System
SERVICING AND MAINTENANCE Engine Coolant Checks the vehicle, turn off the engine and allow it to cool. Ser- WARNING! vice, including a tune-up to the manufacturer's specifi- Check the engine coolant (antifreeze) protection every cations, should be obtained immediately. exhaust system. Do not park or operate your 12 months (before the onset of freezing weather, where vehicle in areas where your exhaust system can To minimize the possibility of catalytic converter...
Page 275 SERVICING AND MAINTENANCE NOTE: • prevent reducing this extended maintenance period, it Mixing engine coolant types is not recommended is important to use the same engine coolant (OAT cool- and can result in cooling system damage. If HOAT • Mixing of engine coolant (antifreeze) other than ant conforming to MS.90032) throughout the life of and OAT coolant are mixed in an emergency, have specified Organic Additive Technology (OAT) engine...
Page 276: Brake System
SERVICING AND MAINTENANCE • coolant in open containers or allow it to remain in Check the coolant freeze point in the radiator and in WARNING! puddles on the ground, clean up any ground spills the coolant expansion bottle. If engine coolant immediately.
Page 277: Automatic Transmission
SERVICING AND MAINTENANCE Fluid Level Check NOTE: WARNING! No chemical flushes should be used in any transmis- The fluid level is preset at the factory and does not cause it to boil unexpectedly during hard or pro- sion; only the approved lubricant should be used. require adjustment under normal operating conditions.
Page 278: Transfer Case
SERVICING AND MAINTENANCE Selection Of Lubricant The rear axle fill and drain plugs should be tightened to When a device does not work, you must check the fuse 22 to 29 ft lbs (30 to 40 N·m). element inside the blade fuse for a break/melt. Use only the manufacturer's recommended fluid Also, please be aware that using power outlets for page 305.
Page 279 SERVICING AND MAINTENANCE CAUTION! When installing the power distribution center cover, it is important to ensure the cover is properly posi- tioned and fully latched. Failure to do so may allow water to get into the power distribution center and possibly result in an electrical system failure.
Page 280 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Micro Fuse Description * If Equipped – – Spare – – Spare 60 Amp Yellow – Rad Fan * 60 Amp Yellow – ESP Pump Non-SRT 40 Amp Green – Air Suspension Comp * 40 Amp Green –...
Page 281 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Micro Fuse Description * If Equipped 30 Amp Pink – ESP / ECU Valves – – Spare 20 Amp Blue – Trlr Tow B/U * 20 Amp Blue – Trlr Tow Park * 30 Amp Pink –...
Page 282 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Micro Fuse Description * If Equipped – 15 Amp Blue KIN / RF HUB / ESCL * – – Spare – 20 Amp Yellow Trlr Tow LT Turn / Stop * – – Spare –...
Page 283 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Micro Fuse Description * If Equipped – 10 Amp Red – 10 Amp Red DTCM / ELSD * – 10 Amp Red ECM / PCM * / EPS – – Spare – 10 Amp Red UGDO –...
Page 284: Bulb Replacement
SERVICING AND MAINTENANCE Cavity Cartridge Fuse Micro Fuse Description * If Equipped F101 – 15 Amp Blue In Car Temp Sensor / Humidity Sensor F102 – 15 Amp Blue Spare F103 – 10 Amp Red PTC / RR HVAC * F104 –...
Page 285 SERVICING AND MAINTENANCE Exterior Bulbs Bulb Name Bulb Number Low Beam/High Beam/LED Headlamps Front Turn Signal Lamps (Bulb Reflector) 7444NA Front DRL/Turn/Park Lamp (Premium) Front DRL/Park Lamp (Base) Front Side Marker Lamps Front Fog Lamps Rear Tail Lamps/Side Marker Lamps Rear Stop/Turn Signal Lamps Rear Liftgate Tail Lamps Rear Backup Lamps...
Page 286: Tires
SERVICING AND MAINTENANCE Tire Markings CENTER HIGH MOUNTED STOP LAMP NOTE: (CHMSL) • P (Passenger) — Metric tire sizing is based on US design standards. P-Metric tires have the letter “P” The Center High Mounted Stop Lamp is an LED assem- molded into the sidewall preceding the size designa- bly.
Page 287 SERVICING AND MAINTENANCE TIRE SIZING CHART EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on US design standards, or "..blank.." = Passenger car tire based on European design standards, or LT = Light truck tire based on US design standards, or T or S = Temporary spare tire or 31 = Overall diameter in inches (in)
Page 288 SERVICING AND MAINTENANCE Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
Page 289 SERVICING AND MAINTENANCE Tire Loading And Tire Pressure Tire And Loading Information Placard NOTE: Under a maximum loaded vehicle condition, Gross Axle NOTE: Weight Ratings (GAWRs) for the front and rear axles The proper cold tire inflation pressure is listed on the driv- must not be exceeded.
Page 290 SERVICING AND MAINTENANCE Metric Example For Load Limit amount equals 1400 lbs. and there For example, if “XXX” amount equals 635 kg and there will be five 150 lb passengers in your will be five 68 kg passengers in your vehicle, the vehicle, the amount of available cargo amount of available cargo and luggage load capacity is and luggage load capacity is 650 lbs.
Page 291 SERVICING AND MAINTENANCE WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them.
Page 292: Tires - General Information
SERVICING AND MAINTENANCE TIRES — GENERAL INFORMATION Both underinflation and overinflation affect the stability CAUTION! of the vehicle and can produce a feeling of sluggish Tire Pressure response or over responsiveness in the steering. After inspecting or adjusting the tire pressure, always reinstall the valve stem cap.
Page 293 SERVICING AND MAINTENANCE very important. Increased tire pressure and reduced Damaged Run Flat tires, or Run Flat tires that have WARNING! vehicle loading may be required for high-speed vehicle experienced a loss of pressure should be replaced operation. Refer to an authorized tire dealer or original immediately with another Run Flat tire of identical size Fast spinning tires can be dangerous.
Page 294: Tire Types
SERVICING AND MAINTENANCE Life Of Tire Replacement Tires WARNING! The service life of a tire is dependent upon varying fac- The tires on your new vehicle provide a balance of many lose control and have a collision resulting in seri- tors including, but not limited to: characteristics.
Page 295: Spare Tires - If Equipped
SERVICING AND MAINTENANCE Summer Or Three Season Tires — Compact Spare Tire — If Equipped (120 km/h) refer to original equipment or an authorized If Equipped tire dealer for recommended safe operating speeds, The compact spare is for temporary emergency use loading and cold tire inflation pressures.
Page 296: Wheel And Wheel Trim Care
SERVICING AND MAINTENANCE Collapsible Spare Tire — If Equipped Full Size Spare — If Equipped WHEEL AND WHEEL TRIM CARE The collapsible spare is for temporary emergency use The full size spare is for temporary emergency use only. All wheels and wheel trim, especially aluminum and only.
Page 297: Snow Traction Devices
SERVICING AND MAINTENANCE Dark Vapor Chrome, Black Satin Chrome, or Low Gloss SNOW TRACTION DEVICES CAUTION! Clear Coat Wheels Use of traction devices require sufficient tire-to-body Do not use scouring pads, steel wool, a bristle brush, clearance. Due to limited clearance, the following snow CAUTION! metal polishes or oven cleaner.
Page 298: Tire Rotation Recommendations
SERVICING AND MAINTENANCE Snow Traction Device (Maximum Pro- Axle Tire/Wheel Size jection Beyond Tire Profile Or Trim Level Equivalent) PURSUIT 255/60R18 265/60R18 265/50R20 Rear THULE XG-12 PRO or Equivalent 265/50R20 CITADEL SRT 392 295/45ZR20 SRT Hellcat TIRE ROTATION CAUTION! WARNING! RECOMMENDATIONS •...
Page 299: Department Of Transportation Uniform
SERVICING AND MAINTENANCE TREADWEAR WARNING! The Treadwear grade is a comparative The traction grade assigned to this rating, based on the wear rate of the tire is based on straight-ahead brak- tire when tested under controlled con- ing traction tests, and does not ditions on a specified government test include acceleration, cornering, course.
Page 300: Storing The Vehicle
SERVICING AND MAINTENANCE What Causes Corrosion? 109. Grades B and A represent higher BATTERY STORAGE MODE levels of performance on the labora- Corrosion is the result of deterioration or removal of With the ignition in the ON position, engine not running, paint and protective coatings from your vehicle.
Page 301: Preserving The Bodywork
SERVICING AND MAINTENANCE • PRESERVING THE BODYWORK If you detect any stone chips or scratches in the Sun damage can also weaken the fabric. Replace the paint, touch them up immediately. belts if they appear frayed or worn or if the buckles do Washing not work properly.
Page 302: Leather Surfaces
SERVICING AND MAINTENANCE Cleaning Plastic Instrument Cluster CAUTION! Lenses Do not use alcohol and alcohol-based and/or ketone The lenses in front of the instruments in this vehicle are based cleaning products to clean leather upholstery, molded in clear plastic. When cleaning the lenses, care as damage to the upholstery may result.
Page 303: Technical Specifications
TECHNICAL SPECIFICATIONS VEHICLE IDENTIFICATION NUMBER (VIN) In the event power assist is lost for any reason (i.e., Inspect the wheel mounting surface prior to mounting repeated brake applications with the engine off) the the tire and remove any corrosion or loose particles. brakes will still function.
Page 304: Fuel Requirements
TECHNICAL SPECIFICATIONS 3.6L ENGINE REFORMULATED GASOLINE Do not use E-85 flex fuel or ethanol blends greater than Many areas of the country require the use of cleaner 15% in this engine. burning gasoline referred to as “reformulated gasoline”. Reformulated gasoline contains oxygenates and are This engine is designed to meet all emis- specifically blended to reduce vehicle emissions and sions regulations and provide optimum fuel...
Page 305: Do Not Use E-85 In Non-Flex Fuel Vehicles
TECHNICAL SPECIFICATIONS CNG AND LP FUEL SYSTEM FUEL SYSTEM CAUTIONS CAUTION! MODIFICATIONS DO NOT use E-85, gasoline containing methanol, or CAUTION! Modifications that allow the engine to run on Com- gasoline containing more than 15% ethanol (E-15). pressed Natural Gas (CNG) or Liquid Propane (LP) may Use of these blends may result in starting and driv- Follow these guidelines to maintain your vehicle’s result in damage to the engine, emissions, and fuel...
Page 306: Fluid Capacities
TECHNICAL SPECIFICATIONS FLUID CAPACITIES Metric Fuel (Approximate) 3.6L and 5.7L Engines 24.6 gal 93 L Engine Oil With Filter 3.6L Engine 6 qt 5.6 L 5.7L Engine 7 qt 6.6 L Cooling System * 3.6L Engine – Without Trailer Tow Package 10.4 qt 9.9 L 3.6L Engine –...
Page 307: Engine Fluids And Lubricants
TECHNICAL SPECIFICATIONS Metric 6.2L Engine Intercooler 4.0 qt 3.9 L 6.4L Engine 16 qt 15.5 L * Includes heater and coolant recovery bottle filled to MAX level. ENGINE FLUIDS AND LUBRICANTS Component Fluid, Lubricant, or Genuine Part We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km) Formula OAT (Organic Additive Technology) Engine Coolant meeting the requirements of the manufacturer Material Standard MS.90032.
Page 308: Engine Fluids And Lubricants - Srt
TECHNICAL SPECIFICATIONS ENGINE FLUIDS AND LUBRICANTS — SRT Component Fluid, Lubricant or Genuine Part We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km) Formula OAT (Organic Additive Technology) Engine/Intercooler Coolant that meets the requirements of the manufacturer Material Standard MS.90032. We recommend using Mopar®...
Page 309: Customer Assistance
CUSTOMER ASSISTANCE Who is Covered SUGGESTIONS FOR OBTAINING SERVICE Warranty service must be done by an authorized dealer. We strongly recommend that you take the vehicle to an You are covered by Roadside Assistance services if you authorized dealer. They know your vehicle the best, and FOR YOUR VEHICLE are a purchaser for use of the vehicle.
Page 310: Fca Us Llc Customer Center
Medford, MA 02155 patch a towing service to transport your vehicle to the (TDD/TTY) closest authorized Chrysler, Dodge, Jeep®, or Ram Attention Claims Department dealer. If you choose to go to another dealer, you will be FCA US LLC reserves the right to modify the terms or To assist customers who have hearing difficulties, FCA responsible for the cost of the extra distance.
Page 311: Warranty Information
CUSTOMER ASSISTANCE REPORTING SAFETY DEFECTS Card in the mail within three weeks of the vehicle deliv- WARRANTY INFORMATION ery date. If you have any questions about the service contract, call FCA US LLC’s Service Contract National See the Warranty Information for the terms and provi- IN THE 50 UNITED STATES AND Customer Hotline at 1-800-521-9922.
Page 312: In Canada
CUSTOMER ASSISTANCE Diagnostic Procedure Manuals Washington, D.C. 20590. You can also Make sure to include the following: • Diagnostic Procedure Manuals are filled with diagrams, Date of Sale (mm/dd/yy) obtain other information about motor charts and detailed illustrations. These manuals make •...
Page 313 CUSTOMER ASSISTANCE La operación de este equipo está sujeta a las siguientes dos condiciones: 1. Es posible que este equipo o dispositivo no cause interferencia perjudicial y 2. Este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
Page 314 INDEX Air Conditioning, Operating Tips ...52 AutoPark ..... .88 Air Conditioning System ....52 Auxiliary Driving Systems .
Page 315 INDEX Climate Control ....47 Disconnecting ....162 Automatic .
Page 316 INDEX Compartment Identification ..259, 260, 261 Fluid, Brake ....306 Getting Started ....167 Coolant (Antifreeze) .
Page 317 INDEX Immobilizer (Sentry Key) ....16 Daytime Running ....42 Inside Rearview Mirror ... . .36, 237 Dimmer Switch, Headlight .
Page 318 INDEX Trailer Brake Disconnected ...80 Heated .....38 Onboard Diagnostic System ... . .85 Transmission Temperature .
Page 319 INDEX Presets ..... .158 Arm The Alarm ....20 Automatic Locking Retractor (ALR) .
Page 320 INDEX Service Contract ....308 Tilt Column ....24 Inflation Pressure .
Page 321 INDEX Fluid .....305 Natural Speech ....160 Voice Command .
Page 323 It is always the driver’s responsibility to comply with all local laws. This Owner’s Manual has been prepared to help you get acquainted with your new Dodge brand vehicle and to provide a convenient reference source for common questions.
Page 324 ® ® “Dodge” (U.S. residents only). ©2023 FCA US LLC. All Rights Reserved. Tous droits réservés. Dodge is a registered trademark of FCA US LLC or FCA Canada Inc., used under license. Dodge est une marque First Edition 24_WD_OM_EN_USC déposée de FCA US LLC ou FCA Canada Inc., utilisée sous le permis. App Store is a registered trademark of Apple Inc. Google Play Store is a registered trademark of Google.

Dodge Durango 2024 Owner's Manual

1 Introduction

2 Getting to Know Your Vehicle

3 Getting to Know Your Instrument Panel

4 Starting and Operating

8 Speed Automatic Transmission

5 Multimedia

6 Safety

Quick Links

Related Manuals for Dodge Durango 2024

Summary of Contents for Dodge Durango 2024