Driver Memory Settings - If Equipped; Programming The Memory Feature - Dodge DURANGO 2021 Owner's Manual

WARNING!
Persons who are unable to feel pain to the

skin because of advanced age, chronic
illness, diabetes, spinal cord injury, medica-
tion, alcohol use, exhaustion, or other phys-
ical conditions must exercise care when
using the steering wheel heater. It may
cause burns even at low temperatures,
especially if used for long periods.
Do not place anything on the steering wheel

that insulates against heat, such as a
blanket or steering wheel covers of any type
and material. This may cause the steering
wheel heater to overheat.
DRIVER MEMORY SETTINGS — IF EQUIPPED
This feature allows the driver to save up to
two different memory profiles for easy recall
through a memory switch. Each memory profile
saves desired position settings for the following
features:
Driver seat

Easy Entry/Exit seat operation (on/off)

(if equipped)
Side mirrors

Power tilt and telescopic steering column

(if equipped)
A set of desired radio station presets

NOTE:
Your vehicle is equipped with two key fobs,

each can be linked to either memory
position 1 or 2.
Be sure to program the radio presets prior to

programming the memory settings.
The memory setting switch is located on the
driver's door trim panel. The switch consists of
three buttons:
The set (S) button, which is used to activate

the memory save function.
The (1) and (2) buttons which are used to

recall either of two saved memory profiles.
GETTING TO KNOW YOUR VEHICLE
Memory Setting Buttons
P T M
ROGRAMMING HE EMORY
To create a new memory profile, perform the
following:
NOTE:
Saving a new memory profile will erase the
selected profile from memory.
1. Place the vehicle's ignition in the ON/RUN
position (do not start the engine).
2. Adjust all memory profile settings to desired
preferences (i.e., seat, side mirror, power tilt
and telescopic steering column [if equipped],
and radio station presets).
29
2
F
EATURE