Advertisement
ULTRA CLEAR RESOLUTION CAMERA
Installation Instructions
1. Locate the mounting template at the installation position and drill the ceiling or
wall if needed. ( *The easy bracket can not be installed on the ceiling)
2. Place the easy bracket on pre-drilled position and fix it through using mounting
screws (4x30mm). Skip this step when an easy bracket is not installed.
3. Route the Power cable to the connecting place.
Hook up the camera bracket with the easy bracket as illustrated below.
4. Fix the camera bracket through using assembly screws (4x15mm).
5. Set the camera's viewing angle and adjust zoom/focus of lens by using the L-wrench.
6. Put the sunshield to the camera unit and tighten the sunshield-bolts.
Assembly Screw
Torque Wrench
CAUTION
• Extreme care should be taken NOT to scratch the window in front of lens.
• Care should be taken the cable is NOT to be damaged, kinked or exposed
in the hazardous area.
• Do not expose the camera directly to a strong light source such as the sun
or spot light.
Mounting Screw
: 4x15mm
4
REAR VIEW
: 4x30mm
2
10
1
3
Cable exit
Advertisement
