Advertisement
ULTRA CLEAR RESOLUTION CAMERA
Installation Instructions
Installation and commissioning Instructions
• Make sure the power is removed before the installation.
• Follow the order for applying power.
First, connect the low voltage (AC24V or DC12V), then plug the AC adapter to
AC outlets to avoid an improper reset from power jitter and a damage from the
surge voltage when no load.
Power Supply Connections
Camera can work with either 24VAC or 12VDC, dual voltage power.
Primary and secondary grounds are completely isolated to avoid the possible
ground-loop problems
※ Signal Assignment for wiring connection
: Attach the Signal Assignment Sticker
in a visible spot for wiring reference.
VIDEO (BNC)
AC24V/DC12V
AC24V/GND
RTX+/RS485
RTX-/RS485
12
Advertisement
