Advertisement
ULTRA CLEAR RESOLUTION CAMERA
Operating Instructions
2-5. COLOR GAIN
3. EZOOM
(default: OFF):
Sets the maximum digital zoom magnification. E.ZOOM function enlarges the
pixel itself, which can cause deterioration of the picture quality.
3-1. MAG
(default: 000):
MAG is the magnification ratio of the electronic zoom. Sets from x000 to x255.
3-2. PAN
(default: 512):
When MAG is greater than 0, the electronic pan is available.
000 is the left most pan and 1023 is the right most pan.
3-3. TILT
(default: 256):
When MAG is greater than 0, the electronic tilt is available.
000 is the upper most tilt and 511 is the lower most tilt.
4. DIS (Digital Image Stabilization)
This function is used to reduce and stabilizes the shaky image from a camera
installed in the vibrated area. FOV(Field of view) will be reduced if set to ON.
5. PRIVACY MASK
Sets ON/OFF for enabling/disabling PRIVACY.
Up to 15 privacy areas are available and each area is programmable in size and
location. The number of privacy areas is limited to four when MOTION DET >
MONITOR AREA is ON.
The privacy areas are masked with the color selected by PRIVACY MASK>COLOR.
PRIVACY MASK SETUP
AREA SEL
DISPLAY
POSITION
COLOR
TRAMSP
MOSAIC
RETURN
5-1. AREA SEL
(default: 128): Increases or decreases the color saturation.
1/15
OFF
-----
-----
-----
-----
(default: 1/15) : Selects one of AREA1~AREA15 to be adjusted.
26
Advertisement
