Advertisement
ULTRA CLEAR RESOLUTION CAMERA
Operating Instructions
7. SYS SETTING
Sets the system related functions.
7-1. LENS
Selects the lens type, AUTO or
MANUAL. AUTO supports DC
auto-iris lens only.
7-1-1. AUTO
• TYPE (default: DC):
This camera does NOT support
video type auto iris lens.
MUST BE SET TO DC ONLY.
• MODE (default: AUTO):
Lens iris is automatically controlled according to the scene light level.
• ADJUST : Adjusts lens open control regardless of the light level.
• SPEED (default: 30):
Adjusts the iris control speed. The lower value is the faster speed.
If the speed is too slow or fast, the iris control may be unstable.
7-2. FLIP
(default: OFF): It is used to inverse the pictures coming from the camera.
• V : Flips the video signals vertically.
• H : Flips the video signals horizontally.
• HV : Flips the video signals horizontally and vertically.
7-3. LCD/CRT (default: CRT):
Selects the correct type of viewing monitor will ensure the most optimal picture.
7-4. COMMUNICATION
Sets the communication related
function.
PROTOCOL(PELCO-D),
BAUDRATE(9600), DATABIT(8),
PARITY(OFF), STOPBIT(1) are
fixed. Can sets only ADDRESS
number.
SYSTEM SETTING
LENS
FLIP
LCD/CRT
COMMUNICATION
CAMERA ID
RETURN
COMMUNICATION
PROTOCOL
ADDRESS
BAUDRATE
DATABIT
PARITY
STOPBIT
RETURN
29
AUTO
OFF
CRT
OFF
PELCO-D
001
9600
8BIT
OFF
1BIT
Advertisement
