Advertisement
ULTRA CLEAR RESOLUTION CAMERA
Operating Instructions
1-9. DEFOG
(default: ON)
This function is used to carry out defog function. Sets LEVEL to eliminate amount
of fog on screen.
If the DEFOG is set to ON, the WDR/BLC function will be deactivated.
1-10. FLK LESS
This function is used to remove the flickering on screen due to differences in light
and electric frequencies.
1-11. ANTI-CR
(default: AUTO)
This mode can minimize the problems related to color rolling caused by differences
between the flicker of fluorescent lights and the frequency of the camera.
Selects AUTO, OFF or ON
2. PICT ADJUST
PICT ADJUST
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
COLOR GAIN
RETURN
2-1. BRIGHTNESS (
Increases or decreases the brightness of the picture.
This is different from that of DC iris lens and simply increases or decreases the
digital gain of video. Do not increase this too much, the dynamic range for the
highlight area will decrease.
2-2. CONTRAST
Adjusts the strength of the image contrast. If set to too high, the dark area may loss
detail and the high luminance area may saturate.
2-3. SHARPNESS
Increases or decreases the sharpness of the picture.
Too much sharpness can make image harsh and show more noise as well as line
flicker at the edge of object in the picture.
2-4. HUE
(default: 064): Adjusts hue for NTSC version only.
(default: AUTO)
Selects AUTO, OFF or ON.
default: 110):
(default: 30):
(default: 08):
110
30
08
064
128
25
Advertisement
