Advertisement
ULTRA CLEAR RESOLUTION CAMERA
Operating Instructions
7-5. CAMERA ID
Sets ON/OFF for enabling/disabling of ID display. Factory default ID is Software
version of camera. User programmed camera ID will be lost and restored with
factory default ID by CAMERA RESET.
Up to 40 characters can be input for camera ID.
CAMERA ID SETUP
VER-DN1.0
ABCDEFGHIJKLMNOPQRSTUV
WXYZ0123456789-!"#$%&'(
)_`,¥:;<=>?@\^*↑↓←→/
CHR1
RETURN
● Use four direction buttons (▲/▼/◄/►) to move a block cursor in character
table and press a set button (◙) to input the selected character.
To move the character input position on CAMERA ID input line, move a cursor
to ← or → on COMMAND LINE and press a set button on ← or →.
● CLR : To clear CAMERA ID input line, move a cursor to CLR on COMMAND
LINE and press a set button (◙).
● POS : To set the location of CAM TITLE to be displayed on the monitor, move
a cursor to POS and press a set button (◙) and then the OSD menu disappears
and CAMERA ID will be displayed on the monitor.
Move CAMERA ID where desired position by using four direction buttons
(▲/▼/◄/ ►) then press a set button (◙) to fix. The OSD Menu will appear again.
8. LANGUAGE
8 languages, ENGLISH, SPANISH, RUSSIAN, PORTUGUESE, GERMAN,
FRENCH, CHINESE and JAPANESE are available.
9. VERSION
The camera firmware version is displayed.
CHR2
CLR
POS
30
CAMERA ID input line
COMMAND line
Advertisement
