Installation Instructions - Eneo IPD-65M2713P5A Quick Installation Manual

Installation instructions

CAUTION: The camera's base should be attached to a structural
object, such as concrete, hard wood, wall stud or ceiling rafter
that supports the weight of the camera. If necessary use appro-
priate mounting material (e.g. anchors) instead of the material
enclosed with the camera.
1. Drill three holes for mounting on the ceiling or wall.
2. Attach the Easy Adaptors at the pre-drilled installation position and fix it by using
mounting screws.
3. Route the power cable to the connecting place.
4. Place the dome base assembly to the Easy Adaptor.
5. Adjust the camera's viewing angle (Pan, Tilt, Rotation)
6. Tighten the set screw to fix a pan plate after the setting.
7. Assemble the dome cover to the dome base unit.
OPEN
Optional mounting accessories
For information on optional mounting accessories please visit the eneo website at www.
eneo-security.com.
LOCK
Plastic Anchor
Mounting Screw
EN
7