Cleaning - Silvercrest 74185 Operating Instructions Manual

Warning:
Under no circumstance should you use receptacles
made of glass or other very fragile/easily breakable
materials. These containers can be damaged and
then cause potentially serious injuries.
1. Open the fixture for the blender 2 and hold the
safety cover 2 firmly.
Note:
The blender e can only be utilised when the whisks
r or the kneading hooks t are not installed.
2. Insert the blender e until it engages and then
twist it firmly tight.
3. To avoid overflows, the container used for blending
should only be filled to 2/3rds of its capacity.
Select a sufficiently large container.
Tips:
• To ensure an effective blending of the ingredients,
the foodstuffs to be processed should cover at
least the lower section of the blender e.
• First switch the hand mixer on when the blender e
has been inserted into the ingredients to be
blended.
4. Push the speed switch 1 into the position "Blender"
(s. section " Speed levels") and press the Turbo
button q. Keep the Turbo button q pressed down
during the whole procedure. The appliance stops
as soon as it is released.
Warning:
Do not operate the blender e for longer than 1
minute in one session. After one minute, allow the
appliance to rest until it has cooled itself down.
5. When you have finished working with the blen-
der e, place the speed switch 1 back into the
position "0" and remove the plug from the mains
power socket.
Attention :
Clean only the lower part of the blender e under
running water. Under no circumstances may water
permeate into the blender e. This could result in
damage to the appliance.
6. To clean the blender e twist and remove it from
the retaining mechanism 2.

Cleaning

Warning:
Always remove the power plug before cleaning the
appliance. There is a risk of receiving an electric
shock!
UNDER NO CIRCUMSTANCES may the
hand element 0 be submersed in water or ot-
her liquids! ! This would increase the risk of a
potentially fatal electric shock should liquids
come into contact with powered components.
• Clean the hand element 0 with the electric mo-
tor only with a damp cloth and, if necessary,
with a mild detergent.
• Clean the mixing stand 6 only with a moist
cloth and, if required, with a mild cleaning deter-
gent.
• The whisks r and the kneading hooks t can
be cleaned under running water or in the dish-
washing machine.
Warning:
Clean only the lower part of the blender e under
running water. Under no circumstances may water
permeate into the blender e. These could result in
damage to the appliance.
- 6 -