Cleaning; Storage - Silvercrest SHMS 300 D2 Operating Instructions Manual

Cleaning

DANGER!
RISK OF ELECTRICAL SHOCK!
► Before cleaning the appliance, disconnect
the power plug from the mains power socket!
There is a risk of electric shock!
Never immerse the hand element q in
water or other liquids!
WARNING! RISK OF INJURY!
Take care when cleaning the blender e!
►
The blade is extremely sharp!
Never submerge the blender e
completely under water. Clean only the
lower part with the blade under running water.
Otherwise, the appliance could be irreparably
damaged.
Clean the hand element q containing the motor
■
using a damp cloth only; if necessary, add a
little mild detergent.
Clean the mixer stand 7 using a damp cloth
■
only; if necessary, add a little mild detergent.
The whisks r and the kneading hooks t can
■
be cleaned under running water or in warm
water with detergent. Dry all parts thoroughly
after cleaning.
We recommend cleaning the attachments directly
after use. This removes food residue and reduces
the risk of bacterial contamination.
SHMS 300 D2
NOTE
The whisks r and the kneading hooks t
can also be cleaned in the dishwasher.
Clean the mixing bowl 8, the lid 0, the dough
■
scraper z in warm water with a little washing-up
liquid.
NOTE
You can also wash the mixing
bowl 8, the lid 0 and the dough
scraper z in the dishwasher.
If possible, place everything in the top basket of
the dishwasher.
Clean the lower part of the blender e in warm
■
water with a little detergent or under running
water. Wipe the upper part with a damp cloth.
If necessary, add a little mild detergent onto the
cloth. Afterwards, wipe off with a cloth moistened
only with water to ensure that no detergent
remains on the appliance.
ATTENTION! PROPERTY DAMAGE!
Clean only the lower section of the blender e
►
under running water. Do not allow water to
get inside the blender e. This could result in
damage to the appliance.

Storage

■ Store the cleaned appliance in a clean, dust-free
and dry location.
GB │ IE │ NI │ CY │
9 ■