Tools Required; Components Rosa - Elisa Emilie Manual

Installation Guide
6 | Elisa Emilie and Rosa
TM TM TM
Installation requirements
UK
The thermostatic mixing valve (TMV) will be installed in such a position that
maintenance of the TMV and its valves and the commissioning and testing of the
TMV can be undertaken.
The fitting of isolation valves is required as close as is practical to the water supply
inlets of the thermostatic mixing valve. Filtered inlet washers are supplied with
the product, if not used then the fitting of strainers is recommended as close as is
practicable to the water supply inlets of the thermostatic mixing valve.

Tools required

Components - Rosa
TM