Fitting The Headworks (Dial Models) - Elisa Emilie Manual

Changing cover buttons
Note: Spare alternative buttons are available should the outlets
be plumbed incorrectly, according to the button graphics.
Please contact customer services.
Fitting the headworks
Elisa Emilie and Rosa
TM TM
(Dual outlet (push button) models only)
The buttons can be swapped to
correlate to your specific outlets if
they do not match. At the rear of the
cover, use a flat bladed screwdriver
to pry off the buttons then press the
new ones in place. (Press against
the areas highlighted in red in the
picture opposite)
(Dial models)
Offer the on/off headworks up
1.
to the Aquahub
into place using the long allen
key provided and the bolts.
Tighten all bolts incrementally in
a clockwise manner until tight.
Install the compression plate
2.
using the screws provided.
Installation Guide | 13
TM
body and secure
TM
UK