Cartridge Temperature Adjustment - Elisa Emilie Manual

The sensing part of the thermometer probe must be fully submerged in the water
that is to be tested.
Any TMV that has been adjusted or serviced must be re-commissioned and re-
tested in accordance with the instructions in the setting section.
The installation of thermostatic mixing valves must comply with the requirements of
the Water Supply (Water Fittings) Regulations 1999.

Cartridge temperature adjustment

•
N.B. Where water supplies vary significantly from the stated requirements
and /or the valve is not commissioned as instructed this product can reach
temperatures in excess of 50°C.
Elisa Emilie and Rosa
TM TM TM
Installation Guide | 17
UK