Fitting the control dials
Elisa
Emilie
and Rosa
TM
TM
(Dial models)
Fit the white spacer rings
7.
and control dials.
Override button needs to be
pressed in when fitting the
temperature control knob/dial.
Using the allen key supplied,
8.
tighten the grub screw to secure
the control dial.
Insert the silicone cover cap, then
9.
open the water isolation valves
and test.
Note: Silicone can be applied
around the wall plate apart from the
drainage hole at the bottom. This
must be left uncovered.
Installation Guide | 15
TM
UK