Elisa Emilie Manual page 19

Troubleshooting
Problem Solution
Remember to depress the pin in order to allow full rotation and
Dial
achieve temperatures over 38 degrees.
not fully
rotating
If depressing the pin is not helping,
its possible you have installed the
temperature override cam incorrectly
(see page 12 or 14).
Or your dial may not be aligned with
the cartridge. In this case, make sure the
markings on the teeth are aligned and
then place your dial on so the pin
is vertical.
Shower is You may have forgotten to open the
service valves within the aquahub /on the
not working
incoming pipework or left your stop cock
(mains water supply valve) closed.
Remove the faceplate and fully loosen the
isolation valves. (The valves will unscrew
and protrude out when loosened). see
page 11 or 14.
If this has not solved the issue, check your
mains supply valve and external isolation
valves on your incoming pipework.
Contact customer services for information on replacement parts.
Elisa Emilie and Rosa
TM TM TM
Installation Guide | 19
UK