Timer Operation - Sharp AH-XP10YH Series Operation Manual

TIMER OPERATION

OFF TIMER
1
Press the OFF TIMER button and
set the time as desired.
• The orange TIMER lamp ( ) will
light up.
• The timer setting will count down
to show the remaining time.
TO CANCEL
Press the CANCEL button.
• The orange TIMER lamp ( ) will
turn off.
NOTE:
• Timer duration can be set from a minimum half an hour to a maximum of 12
hours. Up to 9.5 hours, you can set in half-hour increments, and from 10 to 12
hours, in 1-hour increments.
• The OFF TIMER and ON TIMER can not be set together.
• When the temperature is set during timer setting, the temperature will show in
the display for 5 seconds and then return to the timer display.
• If a power failure occurs while the TIMER is set, the TIMER setting will be can-
celled and will not be retrieved even after the power is restored.
TIMER ON
• The unit will turn on prior to the set time to allow the room to reach the desired
temperature by the programmed time. (Awaking function)
OM B088 EN+TH+VN+CS.indb 12
ON TIMER
1
Press the ON TIMER button and
set the time as desired.
• The orange TIMER lamp ( ) will
light up.
• The timer setting will count down
to show the remaining time.
TO CANCEL
Press the CANCEL button.
• The orange TIMER lamp ( ) will
turn off.
1
CANCEL
EN-12
1
CANCEL
2022/6/21 13:16:24