PLASMACLUSTER
OPERATION
Plasmacluster ions released into
the room will reduce some airborne
mold.
1
During operation, press the PLAS-
MACLUSTER button.
• The remote control will display "
• The OPERATION lamp ( ) will
turn from green to blue.
TO CANCEL
Press the PLASMACLUSTER but-
ton again.
• The OPERATION lamp ( ) will
turn from blue to green.
NOTE:
• Use of the PLASMACLUSTER op-
eration will be memorized, and it will
be activated the next time you turn
on the unit.
• To perform PLASMACLUSTER op-
eration in FAN only mode, press the
PLASMACLUSTER button when the
unit is not operating.
The mode symbol of the remote
control will go off and the fan speed
cannot be set to AUTO.
OM B088 EN+TH+VN+CS.indb 10
BABY MODE OPERATION
Soft , quiet and clean operation
provides optimized cooling for in-
fants.
1
During operation, press the
BABY MODE button.
• The remote control will display " ".
".
• Fan speed will be automatically
set to LOW, SOFT or QUIET.
• Louver will be set to top position
(Coanda position).
• PLASMACLUSTER will be turned on.
TO CANCEL
Press the BABY MODE button
again.
1
NOTE:
• BABY MODE operation is not
available in DRY and FAN mode.
EN-10
1
2022/6/21 13:16:22