Main Setup - Supermicro X10DRL-LN4 User Manual

X10DRL-LN4 Motherboard User's Manual
How to Start the Setup Utility
Normally, the only visible Power-On Self-Test (POST) is the memory test. As the
memory is being tested, press the <Delete> key to enter the main menu of the AMI
BIOS setup utility. From the main menu, you can access the other setup screens.
An AMI BIOS identification string is displayed at the left bottom corner of the screen,
below the copyright message.
Warning: Do not upgrade the BIOS unless your system has a BIOS-related issue.
Flashing the wrong BIOS can cause irreparable damage to the system. In no event shall
Supermicro be liable for direct, indirect, special, incidental, or consequential damages
arising from a BIOS update. If you have to update the BIOS, do not shut down or reset
the system while the BIOS is updating to avoid possible boot failure.
4-2

Main Setup

When you first enter the AMI BIOS setup utility, you will enter the Main setup screen.
You can always return to the Main setup screen by selecting the Main tab on the
top of the screen. The Main BIOS setup screen is shown below.
4-2