X10DRL-LN4 Motherboard User's Manual
Peripheral
Devices
BIOS
Power Con-
nectors
Power
Management
PC Health
Monitoring
•
RAID
IPMI 2.0
•
IPMI 2.0 supported by Aspeed 2400
Serial (COM) Ports
•
One (1) Serial port header (COM1)
USB Devices
•
Two (2) USB 2.0 ports on the rear I/O panel (USB
0/1),
•
One (1) internal USB 2.0 header for two (2) USB
front panel support (USB3/4)
•
One (1) Type A USB 2.0 connector (USB 2)
•
One (1) USB 3.0 header for two USB 3.0 connec-
tions (USB 5/6)
•
16 MB SPI AMI BIOS
•
APCI 2.3, ACPI 2.0/3.0/4.0, USB Keyboard, Plug
& Play (PnP) and SMBIOS 2.3
Power Connectors
•
One (1) 24-pin ATX main power connector (J24)
•
Two (2) 8-pin 12V power connectors (JPWR1/2)
•
ACPI Power Management
•
Main switch override mechanism
•
Power-on mode for AC power recovery
•
Intel
Intelligent Power Node Manager 3.0 (Avail-
®
able when the Supermicro Power Management
(SPM) is installed and special power supply used.
See the note on Page 1-14.)
•
Management Engine (ME)
PC Health/CPU Monitoring
•
Onboard voltage monitoring for +3.3V, 3.3V Stand-
by, +5V, +5V Standby, +12V, CPU Core, Memory,
Chipset, and Battery Voltages
•
CPU/System overheat LED and control
•
CPU Thermal Trip support
•
Status Monitor for Speed Control
•
Status Monitor for On/Off Control
1-8
RAID 0, 1, 5, 10
SM Flash UEFI BIOS
®