Table of Contents
Advertisement
Software Installation Instructions
B-1 Installing Software Programs
The Supermicro website that contains drivers and utilities for your system is located
at http://www.supermicro.com/wftp. Some of these must be installed, such as the
chipset driver.
After accessing the product drivers and utilities page, go into the CDR_Images
directory and locate the ISO file for your motherboard. Download this file to create
a DVD of the drivers and utilities it contains. (You may also use a utility to extract
the ISO file if preferred.)
After creating a DVD with the ISO files, insert the disk into the DVD drive on your
system and the display shown in Figure B-1 should appear.
Another option is to go to the Supermicro website at
products/. Find the product page for your motherboard here, where you may
download individual drivers and utilities to your hard drive or a USB flash drive and
install from there.
Note: Please refer to the documents posted on our website at
supermicro.com/support/manuals/
applicable to your system.
Figure B-1. Driver/Tool Installation Display Screen
Appendix B: Software Installation Instructions
Appendix B
for additional instructions that may be
B-1
http://www.supermicro.com/
http://www.
Advertisement
Table of Contents
