Supermicro X10DRL-LN4 User Manual page 15

Motherboard Features
CPU
Memory
Chipset
Expansion
Slots
Graphics
Network
I/O Devices
•
Dual Intel E5-2600v3/v4 Series Processors
®
(Socket R3-LGA 2011); each processor supports
dual full-width Intel QuickPath Interconnect (QPI)
links (of up to 9.6 GT/s one direction per QPI)
Note: E5-2600v4 requires Revision 2.0 BIOS
(or higher).
•
Integrated memory controller supports up to 1 TB of
ECC DDR4 3DS LRDIMM or 512 GB of ECC DDR4
Registered (RDIMM)/Load Reduced (LRDIMM)
2400/2133/1866/1600 MHz in 8 slots
Notes: 1. Memory speed support depends on
the CPUs installed in the system. 2.. For the
latest CPU/memory updates, please refer to
our website at http://www.supermicro.com/
products/motherboard.
DIMM sizes
•
DIMM 4GB, 8GB, 16GB, 32G, 64GB,
128GB, RDIMM or LRDIMM or 3DS
LRDIMM @1.2V
•
Intel® PCH C612
•
Two (2) PCI Express 3.0 x8 slots (CPU1 Slot2/
CPU1 Slot3),
•
One (1) PCI-Express 3.0 x16 slot (CPU1 Slot5),
•
One (1) PCI-Express 3.0 x4 in x8 slot (CPU2 Slot4),
•
One (1) PCI-Express 2.0 x4 in x8 slot (PCH Slot1)
•
Graphics Controller via Aspeed 2400 BMC
•
One Intel i350 Gigabit (10/100/1000 Mb/s) LAN
Ethernet controller for LAN 1/2 & LAN 3/4 ports
•
Aspeed 2400 Base-board Controller (BMC) sup-
ports IPMI_LAN 2.0
SATA 3.0 Connections
•
S ATA 3 . 0
Ports
1-7
Chapter 1: Overview
One (1) iPass header supports
four connections (I-SATA 0-3)
Two (2) SATA connectors with
power pin built-in for SuperDOM
support
One (1) iPass header supports
four connections (S-SATA 0-3)