Advertisement
GENERAL SAFETY INSTRUCTIONS
Extreme caution should be used when operating all power tools. Know your power
tool, be familiar with its operation, read through the owner's manual and practice safe
usage procedures at all times.
Place the mobile base on a level
surface. Test for Stability in both the
lock
(on
the
positions.
Unplug any power tool before moving
or repositioning the mobile base.
Never use your machine while it is
unlocked on the two swivel castors.
Always lock the two swivel casters
before use.
When moving the base, always push
the base, not the machine. Take care
not to tilt the machine over when
moving.
Secure all fasteners. Make sure that
all nuts & bolts on the mobile base are
fully tightened before use.
The safety instructions given above can not be complete because the environment in
every shop is different. Always consider safety first as it applies to your individual
working conditions.
FOR MACHINES
castors)
and
lock
WARNING!
Do not install machines exceeding the
rated weight capacity of the mobile
base.
Use
only
on
flat,
surfaces, that are free of debris and able
to support the weight of the machine
and the operator.
Ensure that there is a clear path to the
destination. Avoid rolling over any power
cords or debris, clutter or obstructions.
The mobile base is designed to roll
smoothly when operating within its rated
weight
capacity
and
steady pressure to move around, If you
find that excessive force is needed, stop
and check for obstructions or damage to
the wheels before proceeding.
smooth,
sturdy
requires
only
2
Advertisement
