Safety And Instruction Labels; Standards Met - Ferno Viper Stretcher Instructions For Use Manual

1.5 Safety and Instruction Labels

Safety and instruction labels place important information from the
users' manual on the stretcher. Read and follow label instructions.
Replace worn or damaged labels immediately.
Symbol Definition
Ratings Label: Duty cycle, IP rating, General injury
A warning, Read the users' manual, Stretcher load
capacity
Manual override release handle (Non-powered
B
lower/raise legs)
C
Control buttons
D
Directional wheel locks
E
Minimum and maximum load height indicator
F Backrest adjusting
G Leg positioning platform adjusting
H
Knee gatch adjusting
1.6 Compliance
When properly installed and used with appropriate Ferno products, the stretcher meets or exceeds the following specifications and standards
listed below. Standards and specifications are updated periodically. Current standards are available from these organizations.
IP66: Ingress Protection rating. Tested in compliance with dust and water infiltration standards
●
IEC 60601-1-2: Temperature and vibration testing
●
EN 1789 and EN 1865: Vehicle, fastening system, and crash-test standards
●
© Ferno / May 2023, Rev 1
VIPER

STANDARDS MET

A
B
52063
C
D
F
52060
G H
E
5