Ferno Viper Stretcher Instructions For Use Manual page 18

4.3 Stretcher Monobloc Frame
The Viper stretcher is raised and lowered using a hydraulic system,
used also to extend and retract the legs when loading and unloading
on the Viper Loading System (VLS). The stretcher has a 320 kg (705 lb)
load capacity, the VLS rated at 400 kg. The rigid design of the stretcher
frame provides advanced stability during rolling.
The fastening-system posts allow the stretcher to be secured safely in
VIPER Loading System. The stretcher includes foot-end wheel brakes
and head-end directional wheel locks that are actuated at the foot-
end.
INTEGRATED CHARGING SYSTEM
The Integrated Charging System (ICS) uses power from the
ambulance electrical system to automatically charge the battery
while the stretcher is secured in a VIPER Loading System, using a
12v input.
BUTTON LOCKOUT
Button function is locked out to prevent accidental use when the
stretcher is being charged.
18
VIPER
Do not connect the connectors to a voltage higher than
15 V. There is a risk of serious injury to the patient and
damage to the product.
Pressing or
system can damage the stretcher and fastening system.
Do not press buttons while the stretcher is in the fastening
system.
WARNING
NOTICE
while the stretcher is locked in a fastening
© Ferno / May 2023, Rev 1
13