Model 103 Combination Table
1.5 safety and instruction labels
Safety and instruction labels place important information from the users' manual on the table. Read and follow label instructions.
Replace worn or damaged labels immediately. New labels are available from EMSAR (page 14) or from your distributor. The
label shown below is affixed to the bottom of the table.
2 - OPeraTOr skills anD Training
2.1 skills
Operators using the table need:
a working knowledge of mortuary-service procedures.
●
a complete understanding of the procedures described
●
in this manual.
2.2 Training
Operator trainees need to:
read and understand this manual.
●
be trained on the use of the table.
●
practice with the table before using it with a body.
●
record their training information. A sample training
●
record sheet is provided on page 15.
© Ferno-Washington, Inc 234-0037-05 August 2009
Safety Information, Skills and Training
Warning
Untrained operators can cause injury or be injured.
Permit only trained personnel to operate the table.
5