Rolling The Stretcher - Ferno Viper Stretcher Instructions For Use Manual

Table of Contents

Advertisement

5.5 Rolling the Stretcher

Rolling the stretcher with a patient on it requires a minimum of
two trained operators who are communicating, working together,
and maintaining control of the stretcher at all times.
Use additional trained helpers as needed to safely control the
weight of the patient and stretcher. See "Using Additional Help"
on page 7.
Roll the stretcher on smooth, unobstructed surfaces whenever
possible. Do not roll the stretcher sideways or push the stretcher
using the backrest. Roll the stretcher only with both hands holding
the stretcher main frame.
Full 360° Movement: The stretcher allows full maneuverability at
any height, even when fully retracted.
1.
Before rolling, fasten and adjust the patient restraints.
2.
Control-end Operator: Press
stretcher height (Figure 18).
3.
Both Operators/Trained Helpers:
themselves at the ends of the stretcher, hold the main frame
with both hands and maintain control of the stretcher. Direct
trained helpers where to stand and how to hold the stretcher.
© Ferno / May 2023, Rev 1
VIPER
or
to adjust the
Operators
position
WARNING
Rolling the stretcher sideways can cause it to tip and
injure the patient and/or operators. Roll the stretcher
only toward the control end or loading end.
Pushing the stretcher by the backrest can cause it to tip
and injure the patient and/or operators. Roll the stretcher
only by holding the main frame.
Trained operators must consider the environment and
terrain before rolling. Rolling the stretcher in a lowered
position will minimize the potential of a stretcher tip.
18
23

Advertisement

Table of Contents
loading

Table of Contents