Cot And Fastener Compatibility; Safety And Instruction Labels - Ferno PROFlexX User Manual

Safety Information
PROFlexX Series
®

1.4 Cot and Fastener Compatibility

Combining different manufacturers' products into a "mixed-component" cot/cot fastener system can increase the
user's risk of injury and damage. Ferno-Washington, Inc. strongly recommends that only Ferno-manufactured cots
be used in Ferno-manufactured cot fasteners, and that only Ferno-manufactured cot fasteners be used for securing
Ferno-manufactured cots in ambulances.
ANY COMBINATION OF A FERNO COT OR COT FASTENER WITH A NON-FERNO COT OR COT
FASTENER IS MISUSE OF THE FERNO PRODUCT. Responsibility for the outcome of known, intentional misuse
rests squarely on the misuser.

1.5 Safety and Instruction Labels

Safety and instruction labels place important
information from the users' manual on the cot. Read
and follow label instructions.
Replace worn or damaged labels immediately. New
labels are available from EMSAR (page 36) or from
your distributor.
The following labels are affixed to the cot.
PROFlexX Identification Label (Qty. 1)
Do Not Remove Hand Guard/Professional Use Only Label (Qty. 2)
© Ferno-Washington, Inc. 234-3346-00 March 2006
6