Finalizing The Installation; Flame Appearance; To Adjust Venturi - kozy heat JORDAN XL Installation And Operation Manual

FINALIZING THE INSTALLATION

FLAME APPEARANCE:

Flame appearance is affected by several factors including altitude, venting configuration and fuel quality. Although the venturi settings
have been factory set, adjustments may be necessary for optimal performance and visual aesthetics.
When fireplace is first lit, the flames will be blue. Flames will gradually turn yellowish-orange during first 15 minutes of operation. If
flames remain blue or become dark orange with evidence of sooting (black tips), the burner tube venturis may need adjustment.
WARNING: BURNER TUBE ADJUSTABLE VENTURI POSITIONING SHOULD ONLY BE PERFORMED BY A QUALIFIED
PROFESSIONAL SERVICE TECHNICIAN.
WARNING: TO AVOID PROPERTY DAMAGE OR PERSONAL INJURY, ALLOW FIREPLACE AMPLE TIME TO COOL
BEFORE MAKING ANY ADJUSTMENTS.
NATURAL GAS
FRONT BURNER: 1/16" (2mm) OPEN
BACK BURNER: 1/8" (3mm) OPEN
VENTURI POSITION
Closed too far
Open too far
NOTE: IF SOOT IS PRESENT, CHECK LOG POSITIONING BEFORE ADJUSTING BURNER VENTURI. LOGS MUST NOT
BLOCK BURNER PORTS.
IMPORTANT: SLIGHT ADJUSTMENTS TO BURNER VENTURI OPENINGS CREATE DRAMATIC RESULTS. ADJUST AT
SLIGHT INCREMENTS UNTIL DESIRED LOOK IS ACHIEVED. ALWAYS BURN FIREPLACE FOR AT LEAST
15 MINUTES AND ALLOW TIME TO COOL BEFORE MAKING ANY FURTHER ADJUSTMENTS.
TO ADJUST VENTURIS:
1. Remove screen front and glass frame assembly. Refer to page 14.
2. Remove log set.
3. Remove burner assemblies.
4. Loosen screw on burner venturis and adjust as necessary. Tighten screws.
5. Reinstall all components previously removed.
6. Light fireplace and wait 15 minutes before determining if any further adjustments are
needed.
FACTORY SET BURNER TUBE VENTURI SETTINGS
(ADJUST AS NECESSARY FOR YOUR INSTALLATION)
BURNER TUBE VENTURI ADJUSTMENT GUIDELINES
FLAME COLOR
Dark orange flame with black tips
Blue flames
PAGE 32
LP (PROPANE) GAS
FRONT BURNER 5/8" (16mm) OPEN
BACK BURNER 5/8" (16mm) OPEN
VENTURI ADJUSTMENT
Open venturi setting slightly
Close venturi setting slightly
BURNER VENTURI
Figure 32a