Two Speed Wiring - QuietCool ES4700 Owner's Manual

6. Feed the 2 wire Romex through the handy box. Using the included wire nuts, tie the black wires
together. Tie the white common wires together. Tie your bare copper wire and green ground wires
together.
7. Carefully reinstall the handy box cover.
Figure B
Whole House Fan Whole House Fan
4-2 Two Speed Wiring (for ES-2250, ES-3100, ES-4700, ES-5400, ES-6000, ES-7000)
1. For this installation, you will need (3) 2 wire Romex, double-gang retrofit box, an 8 Hour Timer, and a
HIGH-LOW-OFF Switch.
2. Using your first 2 wire Romex, tape the white common wire because we are going to use it for low
speed. Attach the white wire to the top gold screw on the right of the switch. Then, attach the black
wire to the bottom gold screw. (see Figure C)
3. With a piece of bare copper wire, attach it to the green ground screw on the switch.
4. Using the second 2 wire romex that's going to your timer, use one of the supplied wire nuts to tie the
black wire to the black wire on the timer. Tie the white wire from the 2 wire Romex to the white wire
on the timer.
5. Using a wire nut, tie all bare copper wires together with the green ground wire on the timer.
1-888-QUIETCOOL
Tie All Ground & Bare Copper Wires Together Tie All Ground & Bare Copper Wires Together
All White Common Wires Together All White Common Wires Together
All Black Wires Together All Black Wires Together
14-2 Wire 14-2 Wire
Switch Switch
15