Installing An Internal Fibre Channel Tape Drive Equipment Required; Installation Steps - Quantum DLT S4 User Manual

Equipment Required

Installation Steps

DLT-S4 Product Manual
Chapter 10 Installing an Internal Fibre Channel Tape Drive
You need the following items to install the tape drive in a system:
• Four (4) M3 x 8 mm long screws
• Screwdriver
• Fiber optic cable
To install the tape drive, perform the following tasks in this order. Each
task is described in detail on the pages listed below.
Step No. Step
Unpack the tape drive.
1
Secure the tape drive in the system.
2
Connect the cable.
3
Confirm the installation.
4
Add additional devices (optional).
5
Equipment Required
10
10
Page
Page 83
Page 83
Page 86
Page 87
Page 88
81