Figure 37 Connecting the SAS
and Power Cables
Confirming the Installation
DLT-S4 Product Manual
To confirm the installation, turn on the host computer.
The screens displayed at power-on contain:
•
BIOS
•
Operating system
•
SCSI controller information
If the first screen displays host adapter and SCSI ID information
indicating the drive is a Quantum product, then the installation was
successful.
If the installation was NOT successful, see
Troubleshooting
on page 124.
Chapter 11 Installing an Internal SAS Tape Drive
POST and SCSI
Confirming the Installation
11
96